400exdave
03-26-2005, 01:41 PM
Ok. I'm getting irritated here, so I thought I would ask the experts on what to do :D
Alright, I put the choke on full and hold the start button and it starts, and while im holding the throttle aprox. 1/4 of the way the bike is revving and sounds good.... then all of a sudden it starts sputtering, so I turn it down to half choke... and it revs fine with me holding the throttle, then it starts sputtering again and sounds like its gonna stall, so i move it to no choke and its running good then all of a sudden just stalls out. so i try starting it again and it wont start at all, I have to have a battery charger hooked up to it while im starting it so it wont kill the battery. and it still doesn't start. I'm running a 155 dyno jet main, and a stock pilot jet and a needle on the third notch. I'm running a 155 because that is what i was told was a good size. now is a dyno 155 bigger(or smaller) than a 155 kehein jet size? any help would be good. I am within 300 feet below sea level. I have a k and N filter with lid off, and a full yoshi pipe on there. this is really bugging me and i need help!!!
thanks
dave
Alright, I put the choke on full and hold the start button and it starts, and while im holding the throttle aprox. 1/4 of the way the bike is revving and sounds good.... then all of a sudden it starts sputtering, so I turn it down to half choke... and it revs fine with me holding the throttle, then it starts sputtering again and sounds like its gonna stall, so i move it to no choke and its running good then all of a sudden just stalls out. so i try starting it again and it wont start at all, I have to have a battery charger hooked up to it while im starting it so it wont kill the battery. and it still doesn't start. I'm running a 155 dyno jet main, and a stock pilot jet and a needle on the third notch. I'm running a 155 because that is what i was told was a good size. now is a dyno 155 bigger(or smaller) than a 155 kehein jet size? any help would be good. I am within 300 feet below sea level. I have a k and N filter with lid off, and a full yoshi pipe on there. this is really bugging me and i need help!!!
thanks
dave