300ex73
03-24-2005, 07:30 AM
If anyone out there has the IMS/Roll pegs for their Z400, it would be a big help if I could get some measurements.
Measurements I need.
Distance between the 2 bolt holes used for mounting nerfs/heelgaurds
From the mounting pad of the pegs to the nerf/heelgaurd bolt hole nearest the frame. Use a ruler and tape measure or 2 rulers for this one. Use the ruler and lay it against the mounting point for the pegs. Use the tape measure or second ruler to measure distance between bolt hole and first ruler.
I also need the distance between the rear rung and the bolt hole that is on the subframe that is used for the upper mounting point for heelgaurds.
Measurements I need.
Distance between the 2 bolt holes used for mounting nerfs/heelgaurds
From the mounting pad of the pegs to the nerf/heelgaurd bolt hole nearest the frame. Use a ruler and tape measure or 2 rulers for this one. Use the ruler and lay it against the mounting point for the pegs. Use the tape measure or second ruler to measure distance between bolt hole and first ruler.
I also need the distance between the rear rung and the bolt hole that is on the subframe that is used for the upper mounting point for heelgaurds.