Adjustments on raptor rear shock

[stonerider250x]

for adjusting the pressure on the resiovor do i just turn the flat head screw to make the shock stiffer or softor or do i have to loosin the nut thats around it? i dont wanna loosin the nut and end up lettin pressure out the shock or trien to turn the screw and end up strippen it out. so can some one give me and answer

thanks'
jarret

[stonerider250x]

bump

[sprtrx300ex]

ok, the shock is rebound, compression, and preload adjustable.


Compression- how stiff or soft the shock is ( bottom out resistence)

Rebound - How quick the shock returns to its normal position after being compressed

Preload- Used to adjust the ride height and can also stiffen the shock, but will cause less comfortable ride

Compression is adjusted by turning the little flathead screw on the resivor

Reboung is adjusted on the bottom of the shock, also a flathead

Preload is adjusted on top of the springs. You must loosen the top ring, then either unscrew the bottom ring (lowers ride height) or screw the bottom ring down (raises ride height).


Whatever you do, DO NOT mess with the bolt that connect the hose to the shock.

hope this helps, if you have naymore questions, ask

[Colby@C&DRacing]

DO not loosen the nut around the adjustment screw. THe nut is the compression device itself if you loosen it you will lose oil out of the shock.

[stonerider250x]

ight thanks guys yall told me everything i need to know.

thanks
jarret