kmmon1
03-22-2005, 03:51 PM
The other day I changed my oil, new filter and filled it up. I rode around for a while and it was fine. short rides around the house. The next night I installed my suppertrap IDS2 full system, I ran it but did not drvie much it was late, the next day I installed the new jet a 128 main, and down one notch on the needle. The quad runs fine and had much more power, but after a few short rides it starts to blow some blue smoke(oil). I let it sit for a few started and it was fine, after a few minutes again it was blowing some blue smoke again. I check the plug it was black so it is probaly running a little rich, i still need to modify the air box. Before any of this the bike bike was stock and never blew any smoke or had any problems. I checked the oil that night and it looked over full on the dipstick even after sitting for 10 minutes. I checked oil today and it is in the right level. I realized i was dripping some oil and found the little o-ring on the filter cover was missing the small one not the main. What would cause the oil burn, the oil had no gas smell.. any info