Tie rod end hits a-arm

[trick250r]

when i turn my wheels all the way, the bolt on the tie rod hits my a-arms before the stops on my steering stem stop it from turning. is there anything to do about it because its starting to scratch the paint off of my a-arms.

[edz250r]

Mine hits on the left arm as well. I run a stock frame with LSR arms and LSR steering stem. I called LSR and they said its common for this to happen unless you run their frame as well. I think this is a problem for a lot of guys...

[Rich250RRacer]

Originally posted by edz250r
Mine hits on the left arm as well. I run a stock frame with LSR arms and LSR steering stem. I called LSR and they said its common for this to happen unless you run their frame as well. I think this is a problem for a lot of guys...

It happens when you run their frame too. Mine hits on both sides on my 2003. My 2001 has stock Honda arms and everything clears with plenty of room to spare.

[Cody_300ex]

My 300ex does it when the front end is compressed. It has stock a-arms.