Best Brakes

[Joe400ex]

what are the best brakes for a 400ex and were can i find them.web please

thank you

[47501exracer]

I believe DP pads are the best out of the 5-6 brands I have tried. I get mine at the dealer and I think Dennis Kirk has them too.

[ReconRider25]

i find stock to be the best. i tried dp but they only lasted half as long as stock ones did.

[blue416ex]

ebc

[Joe400ex]

my stock ones stoped good, do the DP's or the EBC stop better can somone please explain to me what they are really special for

thank you:confused:

[K_Fulk]

250R :D

[mx400]

wave rotors w/ ss lines and ebc sd pads

[Joe400ex]

I went with the


EBC
Racing Sintered MXS Brake Pads

[Joe400ex]

but they will be fine with the stock rotors right, the guy at dennis kirk tech said ya they will be fine, but i rather ask people that have raced and have had experience

[ReconRider25]

you can use any kind of brake pads on the stock rotor.;)

[Joe400ex]

i didnt know if they would make them worp or anything

[Joe400ex]

Originally posted by Joe400ex
i didnt know if they would make them worp or anything

but by the way are those brakes good

[EX4me]

I honestly think you get more life out of the stock pads. I'm using stock pads along with Braking wave rotors & Stream Line brake lines.:)

[Joe400ex]

Originally posted by EX4me
I honestly think you get more life out of the stock pads. I'm using stock pads along with Braking wave rotors & Stream Line brake lines.:)

i ride mabey once a week so for what i got is good right

[Joe400ex]

so i maid a good decision

[Crazy Diamond]

The EBC standard are good. Any Sintered Metal or Harder pads wear your rotors down. The standard work as good as the others but they wear quicker. But thats better than getting new rotors once a year!

[underpowered]

i like Ferodo pads the best. they are about the cheapest pads i have found and last longer than most as well.

[JDiablo]

i personally like stock pads,i have EBC on now and i rode twice with them and the rears have a lil bit of life and the fronts are shot basically,i have stockers waiting for when i get my wave rotors in

[flyingbyfast400]

wave rotors, and EBC pads seem to get the stoping job done pretty well... I couldnt tell ya kinda of brake line Im using.... il have to look

[Rootar]

im going to pick up my new ebc slintered metal pads today for the front and back cause all my brakes are shot. they had zero pad left when i took them off. did i make the wrong desicion. damon said they last really long. and what is this about wearing out the stock rotors. i know about them getting too hot and warping but waering down? will these ebc slintered metal pads do this?

and im getting the lil bro new rear brakes for the 250. its a drum brake on the back rite and we ordered the ebc severeduty grooved brake shoe. will this do anythign to the drum?

[Joe400ex]

i dont know i hope not becaus i ordered EBC
Racing Sintered MXS Brake Pads and i am puting them on tomorow i hope i dont F*ck up my stock rotors, does any one think i will be fine i only ride once or twice a week. lucky for twice:ermm: :ermm:

[Joe400ex]

anyone
:ermm:

[K_Fulk]

Don't worry so much, It takes a damn long time to wear out rotors. :macho

[Joe400ex]

alright thats cool then are they better than stock ones:devil:

[K_Fulk]

I dont think there is much diffrence in the 100 diffrent brands out there. i just get what I can find the cheapest.

[Joe400ex]

well i will tell u guys how they are when i get them one:D

[440ex#28]

Wave rotors with stainless steel lines and EBC pads :D

[Crazy Diamond]

Trust me! I put new rotors on and Sintered Metal Pads and a friend put Sintered pads on his too. The both of us bought standard pads after I noticed about 3 months later that the rotors were wearing pretty good. And I only ride once to twice a week! Sure the sintered last longer but for everyday riding you'll change your rotors before your next set of pads wear down!