PDA

View Full Version : Bolt Broke Off In Front Sprocket!!


Dan123
03-18-2005, 02:50 PM
HOW DO I GET IT OUT !!! NEED ANSWERS QUICK!
PunkA$$
03-18-2005, 02:52 PM
TRY BOLT EXTRACTOR!! OR BUY NEW SPROCKET!!!
whiteflash
03-18-2005, 07:14 PM
i did that too! but on mine there was just enough screw out that i could twist it... you might try using a flat head screwdriver and try to find a ridge and slowly unscrew it. usually when a bolt is broken in half it will leave a little ridge...good luck
Dan123
03-18-2005, 07:29 PM
i got it out
whiteflash
03-18-2005, 07:34 PM
how'd you do it?
2muchquad
03-18-2005, 09:40 PM
a slightly smaller drill bit...:D
Dan123
03-19-2005, 06:13 PM
got an electric drill, drilled a small hole in it then took a philips screw driver bit stuck it in the hole and it pulled it right out
coryatver
05-11-2005, 08:06 PM
I did that before and messed it up trying to fix it and had to get a new sprocket.