Loads of After-Market & Stock Raptor Parts

[Mad B]

Hey everyone, I'm new to ATVriders.com forums - but I've seen a lot of interesting / useful info throughout the forums. Glad to be a part of something so good!

Anyway, throughout the past few years of racing - I've acquired a ton of Raptor parts that I'm willing to part with. Attached below is a large list, take a look and e-mail me if you see anything that you want. If you're interested, or if you have any questions - just let me know. Prices have been left off, as they are definitely negotiable - just make me an offer.

 CT Sonic Full Race exhaust system (system alone stated to push HP to 48.6 @7100rpm). This pipe is in excellent shape!
 NEW Dura Blue Front Lowering Kit (Does not negatively impact shock angle; adjusts top shock mounts)
 NEW Dura Blue Graph-Lite Front Wheels spacers 2 ½” (widen for extra stability, EZ on/off design)
 NEW Denton 7 stage Steering Stabilizer (fully rebuildable)
 NEW Lonestar Axle Lock Nut (works with Lonestar and stock axles)
 NEW Blue & White HMF graphics kit (full kit = tank, all 4 fenders, and side panels)
 Stock complete airbox assembly with:
 Open (dirt / water sealed) Airbox Race-Lid Design (includes stainless frame, bolts, and new Outerwears cover). The covered hole is the same length and width as the top of the airbok lid.
 Pro-Design intake with K&N Filter and Outerwears cover
 NEW No-TOIL 2 stage Foam Filter (to be used overtop of stock filter holder)
 GYTR Billet Oil Filter / Water Pump Cover
 GYTR Light Guards (black)
 Complete set HOLESHOT XCT 6-ply tires [approx. 80% tread remaining] (front=23x7x10; rear=22x11x9). Excellent ground clearance / traction / overall durability.
 Rear set of SHREDDERS (20x11x10), on stock rims (Near new condition on both; 95% tread remaining)

Prices Highly Negotiable for all Stock Items (listed below):
 Stock set of carburetors (’01 model), re-jetted with 150 and 155 jets
 Stock cam chain
 Stock shift lever assembly
 Stock steering stem
 Stock handle bars
 Stock axle
 Stock heel guards
 Stock emergency brake mount and cable
 Stock front shocks with ‘YAMAHA’ dust covers (Grey with black letters).

Thanks for looking!

[rwhitaker04]

how much shipped to 46121 for the xcrs, and are they on rims?lmk..i need them fast..

[Mad B]

The tires that I have for sale are ITP Holeshot XCT's, not XCR's. Again, they have about 80% tread remaining. The fronts are 23x7x10; the rears are 22x11x9. The tires are not mounted on any rims right now. I did that for easier shipping!!

I do have a set of stock Raptor rims (rear only) that I'd be willing to sell as well (I'd even have them mounted before shipping, if interested). They have the rolled edge, very strong and in excellent shape. Sorry, but I don't have any fronts that I want to get rid of.

Anyway, since the 4 tires are in such good shape - I was looking to get $155.00 (not including shipping) for them. I'd take $215.00 (not including shipping) for the 4 tires and with the rears mounted on the stock rims. Let me know if you're interested (or if you would like to make me an offer).

As for the shipping costs, I won't be able to find out until tomorrow. I could let you know first thing in the A.M. though. Just to let you know, I'm in central Illinois, so it wouldn't take that long at all for you to get them.

Thank you,
MAD B

[m250r]

do u have a stock rear shock?

[Mad B]

Sorry, I do not have stock rear shock for sale at this time.

[rwhitaker04]

i dont need the rims i got a honda...im just looking for the tires...and could u do 155 shipped..

[Mad B]

I can't do $155.00 shipped. I would assume that shipping is going to be somewhere between $25.00 - $40.00 (I'll know exactly how much before we close the deal); and I really don't want to just eat that cost. Plus, I'm already giving you a great deal on the tires. You'll see what I mean, once I send you the pics this evening.

Let me know if you're still interested - and if you still want me to send the pics.

Thank you,
MAD B

[hontrx265r]

send some pics and a price for the prodesign intake with k&n and the no toil

[hskers82]

pics and price on CT exhaust, oil filter/water pump cover and stock steering stem

[Mad B]

hskers82, and hontrx265r - I've responded to both of you. Check your Private mail. Thank you for your inquiries.

Please let me know what you think.
MAD B

[Smoker]

 NEW Denton 7 stage Steering Stabilizer (fully rebuildable)


How much?

[Mad B]

Hey Smoker, thank you for your inquiry. The steering stabilizer is brand new in the package (never used). I'd like to get $125.00 (shipping included). Actually, I still have the receipt taped to the package as well, and I paid $170.59 (equals the purchase price, plus the outrageous shipping costs from Denton).

Let me know what you think.

Thank you,
MAD B

[Mad B]

bump

[Mad B]

Come on guys (and gals), I have a lot of parts that I need to get rid of. Anyone else interested?

Thank you,
MAD B

[Mad B]

TTT

[Mad B]

ttt

[250R-Dee]

How much is shipping on the tires to zip 96379 via USPS priority mail? That is a military post office.

rwhitaker - I have a set of 450R shocks for sale. I tried to PM you but your box is full.

[Mad B]

Hey 'trx250rJapan, check your private mail. You gotta let me know which set of tires / wheels your interested in.

Thank you,
MAD B

[Mad B]

No problem, sorry about the crazy shipping prices - that is a long way from the states though.

MAD B

25 for the K&N air filter or 45 for every thing with the air filter

[Mad B]

Already sold. Thanks anyway.

MAD B

[Mad B]

ttt

[Mad B]

ttt

[Mad B]

bump

[Mad B]

bump

[Mad B]

bump

[kilabeez0]

dude, those XCT's are $70 a piece NEW and u want $155 PLUS shipping? And shredders are like $40 a piece and u want $215 PLUS shipping? your crazy!!!! only %80 tread left, good luck selling them at that price!

[Mad B]

Thanks for your input dick! If you think it's too much money - then why even waste your time replying to the post? Or, are you the Moderator for all of the 'For Sale' posts on this web-site???

Didn't think so.

Now, let me waste some of my time replying to you:
Your negative comment was towards my quote of $155 (plus shipping) - because they are "$70 a piece NEW". You do they math: I'm asking $155 for all 4.

Then you made a negative comment on the Shredders that I have posted for $215 - because you said that you can get them for $40 a piece. Please go ahead and do so. These are in excellent shape and are mounted on stock raptor wheels, which are also in excellent shape.

SO, if you want to 'dick on' other people's posts, go ahead ~ please refrain from doing so on mine.

[kilabeez0]

ok for all those who would like a much better deal go here

[www.Rockymountainatv.com

:devil: :blah: :devil:

[pjleslie]

How much for the oil and pump cover, front spacers, locknut, and graphics kit? What will you take for each one and how much will it be if I buy all of them? Thanks man.

PJ L.

[Mad B]

Hey 'pjleslie', thank you for your inquiry. Actually, I've already sold a number of the items that I had previously listed on this post. Here's the scoop on the items you've asked about:

* Oil and Water Pump Cover ~ $50.00 (plus shipping) {Retails for $89.95}
* NEW Locknut (still in package) ~ $70.00 (plus shipping). {Retails for $105.00}
* HMF Graphics Kit ~ SOLD
* Front Wheel spacers ~ SOLD


I'd be glad to help you out on shipping, and charge a flat $5.00 for shipping if you wish to buy the Locknut and Oil / Water Pump Cover.

Let me know what you think.
Thank you,
MAD B

[rwhitaker04]

hey im still tryin to throw the money together for the tires...and u wouldnt happen to have any raptor bars would u? stock or aftermarket..just lmk

[Mad B]

YEP - I have a set of stock bars, mounted on a stock steering stem. Didn't really plan on selling them - but I'd be glad to help you out if you need them....

Send me a 'private message' and let me know what the status is on the moeny situation; I'd be willing to work with you on a package (tires/bars/steering stem/ shipping). Let me know.

Thank you,
MAD B

[Mad B]

ttt

[Mad B]

ttt

[Mad B]

Hey guys, I've sold most of my stuff on here already; however, I would really like to get rid of everything else as well..... So, I'm re-posting the items that still have left - in case someone might be interested, please take a look and let me know:

 CT Sonic Race System
 NEW Dura Blue Front Lowering Kit
 NEW Lonestar axle lock nut assembly (works with Lonestar and stock axles)
 NEW No-TOIL 2 stage Foam Filter (to be used overtop of stock filter holder)
 GYTR Billet Oil Filter / Water Pump Cover
 GYTR Light Guards (black)
 Complete set HOLESHOT XCT 6-ply tires [approx. 80% tread remaining] (front=23x7x10; rear=22x11x9). Excellent ground clearance / traction / overall durability
 Rear set of SHREDDERS (20x11x10), on stock rims (nearly new condition on both; 95% tread remaining)
 Set of 4- American Racer Dirt Track tires [approx. 75% tread remaining] (front=18x6x10; rear=18x10x10) 32/Medium compound.
 2nd set of rears [approx. 80% tread remaining] (rear=18x10x10) 32/Medium compound; on Douglas Red Label rims (10x10, 4+6 off-set)

 Stock set of carburetors (’01 model), re-jetted with 150 and 155 jets
 Stock shift lever assembly
 Stock axle
 Stock exhaust

Again, if you think you might be interested - let me know. I'll do what I can to work with you and give you the best deal possible.

Thanks,
MAD B

[Mad B]

ttt

[crandles]

Still have the CT system? If so how much? I might be interested.

[Mad B]

Sorry, the CT Sonic System has been sold.

Thanks for checking though! Be sure to let me know if you're interested in anything else.

MAD B

[Mad B]

All prices are Negotiable. Make an offer on anything that you see listed below; we can discuss.

 NEW Dura Blue Front Lowering Kit (Does not negatively impact shock angle; adjusts top shock mounts)
 NEW (in package) Lonestar axle lock nut assembly (works with Lonestar and stock axles)
 NEW (in package) NO-TOIL 2 stage Foam Filter (to be used overtop of stock filter holder). Will provide the (NEW) three stage maintenance kit (filter cleaner, filter oil, and rim grease) at no extra charge.
 GYTR Light Guards (black)
 Complete set HOLESHOT XCT 6-ply tires [approx. 80% tread remaining] (front=23x7x10; rear=22x11x9). Excellent ground clearance / traction / overall durability
 Rear set of SHREDDERS (20x11x9), on stock RAPTOR rims (nearly new condition on both; 95% tread remaining)
 Set of rear American Racer Dirt Track tires [approx. 80% tread remaining] (rear=18x10x10) 32/Medium compound.

Prices Highly Negotiable for all Stock Items (listed below):
 Stock set of carburetors (’01 model), re-jetted with 150 and 155 jets
 Stock cam chain
 Stock shift lever assembly
 Stock axle
 Stock exhaust
 Stock choke and cable
 Stock heal guards
 Stock Emergency brake mount and cable

Thank you,
Mad B

i need the intake boots that go between the carb and the motor

[Mad B]

Hey 'Nacs', sorry man - I already sold the intake boots (both sets; before the carbs, and after the carbs). Sorry I couldn't be of more help to you.

I still have the stock carbs 4-sale though (with aftermarket needles and 150 & 155 jets). Doesn't sound like you need them - but I thought I'd throw that out there.

Thanks,
MAD B

[Mad B]

My updated list (see 3 posts above) is still accurate.

I would really like to get rid of this stuff; so, if you might be interested, let me know. I'd be glad to work with you on a good price. Plus, if you don't see it posted, let me know anyway - I might be able to help.

Thank you,
MAD B

[crandles]

How much for the shredders on stock rims?