lugnuts for hipers

[brandonpeake]

do u run special lugnuts for hiper beadlocks? the oem 450r honda ones just look like they would back off?
just got my quad going back together and notcied this

[baja_racer]

You could flip them around, the acorn no longer works. Go to a cycle shop, they should carry the ones you need.

[brandonpeake]

but what type am i looking for?

[BSTURDIVANT]

Stock lug nuts -flat side in with hardened washers works great and protects the holes from "shrinking"

[baja_racer]

They are flanged....and use a washer.

[jeepnrocks]

DON'T use the stock lug nuts the way you normallly would though. it will chew the rim up badly

[WhiteZee]

Originally posted by brandonpeake
do u run special lugnuts for hiper beadlocks? the oem 450r honda ones just look like they would back off?
just got my quad going back together and notcied this
who did you buy them from? they should have told you what to do when you bought them.

[Meek]

Use stock Cannondale Nuts:eek2:

[bradley300]

nuts off a blaster will work also

[brandonpeake]

Originally posted by bradley300
nuts off a blaster will work also

i had thought something like banshee lug nuts is what u would need so thats funny

[roughrider01]

Originally posted by brandonpeake
i had thought something like banshee lug nuts is what u would need so thats funny

Why dont you just flip the stock ones around and use a washer? Thats what I did, works just fine.

[the_hulkamaniac]

The Blaster ones are the 15mm's with the "washer flange" built in, right? If so there nice, quick to use and clean looking.

[rowlrag]

I've used C-dale nuts, but they are slightly larger than Honda, enough that they always get stuck in the socket, Honda's fall right out. I now run stock Honda's on backwards with no washers and they do not tear up the wheels.
1 thing you need todo to a Hiper, is if you have to beat the wheel of the spindle, then find a drill bit the same size as the hole, and redrill the holes 1 size bigger. Some you don't have to, but most the ones I use I have had to redrill a tad bit larger. Makes changes alot easier.

[brandonpeake]

so you are saying to drill the hole in the hiper the stud from the wheel goes through one size bigger?

[baja_racer]

No...not one size bigger....just open it up a bit.

[rowlrag]

Originally posted by brandonpeake
so you are saying to drill the hole in the hiper the stud from the wheel goes through one size bigger?
Just enough that the wheel slides on the studs easily withou having to beat them on and off.
I have a new set i'm mounting tomorow so I'll post the size I use.

[WhiteZee]

Originally posted by rowlrag
Just enough that the wheel slides on the studs easily withou having to beat them on and off.
I have a new set i'm mounting tomorow so I'll post the size I use.
are you selling your old set?

[rowlrag]

No I got 4 fronts and 4 rears in case i get a flat.