kill switch install

[steelerface]

Can someone help me with installing a EMGO deadman kill switch. I am not a rocket surgeon or brain scientist

[JOEX]

If it's a two wire set up one should go to a good ground (metal to metal on the frame). The other should go the positive side of the coil. I think that's right:huh

[aviator4]

On a 400ex, Under the "driver side" front fender, just in front of the oil cooler mounted to the frame, you will find a six wire plug, the black with white stripe wire coming out of the FRONT side of that plug is where you splice in one wire of the kill switch.

I've mounted the ground (the other wire from the kill switch) on the gusset thats just in front of that plug with a self-tapping screw. Thats it!