PDA

View Full Version : houser subframe


SRH
03-07-2005, 09:11 PM
anyone know what there new subframe is , is it a 6 point bolt on?

i just got my frame done so i dont want to weld tabs on and stuff im looking for a 6 point bolt on subframe and they dont have any pics on there site y et
blasterkid
03-08-2005, 10:51 AM
call up jrd 856 881 5299 they make one that you dont need to weld tabs and they can get them powdercaoted call em up and tell them mike sent ya
blasterkid
03-08-2005, 10:52 AM
also check out there web site www.jrdmech.com
SRH
03-08-2005, 03:28 PM
do they sell the whole subframe? that bolts on in 6 spots or are you talking about there subframe brace? if there is a 6 point, any idea of what price range its in
blasterkid
03-08-2005, 04:48 PM
it is the "sub Frame" all new powdercaoted to any color you want with all the nessacary hardwear i think the price is 589.95
HONDA55
03-08-2005, 05:14 PM
Try JB and I think Herrmann is coming out with one for a good price. Both are 6 point bolt on.
intruder
03-08-2005, 07:16 PM
JB sub frame is nice here's a picture tell them Justin Trevis sent you.
SRH
03-08-2005, 07:55 PM
wow that jb one is really nice, just what im looking for , i have a few question about it, where exactly do the lower mounts bolt to? can i get it pced various colors? what is the price...or price range its in...can i run any battery box i want? will it work with any exhausts? anddd..is it a pain to bolt up?


thanks for the help!
Sandsjbyz22
03-09-2005, 06:28 AM
www.jbatvracing.com

Retail $495 extra for chrome
SRH
03-09-2005, 03:15 PM
i like the jb subframe, but i have trouble understanding why theres is almost 100 bucks more than a lsr weld on 6 point...im looking to spend 400 or under, if not i will get the rpm subframe brace....anyone have expeirence with those? ive asked before but never gotten an answer... i dont want to stress other areas of my frame either i wanna keep the same stress points as stock
Sandsjbyz22
03-09-2005, 03:31 PM
Well I guess you have to look at shipping your frame to arizona and the labor involved which im sure is not cheap, but if you could buy the kit and have a buddy weld it would be cheaper.
SRH
03-09-2005, 03:37 PM
Originally posted by Sandsjbyz22
Well I guess you have to look at shipping your frame to arizona and the labor involved which im sure is not cheap, but if you could buy the kit and have a buddy weld it would be cheaper.

i just had my frame gusseted and powder coat i dont wanan grind off new pc and weld tabs...if i was using my head i would of had wlash weld on the tabs for there 6 point....oh well, id like to have the jb setup but i really do not want to spend 500 for a subframe
HONDA55
03-09-2005, 03:38 PM
Try the Herrmann one, that should be in your price range.
SRH
03-09-2005, 03:45 PM
Originally posted by HONDA55
Try the Herrmann one, that should be in your price range. wow thats nice, where exactly does the jb one bolt to, i see the herman bolts on the fender support mounts...can i still run fender mounts and will it intereferet with the brake resvoir relocator?
K_Fulk
03-09-2005, 10:02 PM
I'm pretty positive the jb one bottom part bolts in with a longer bolt. Through the footpeg mount, on the backside of the frame rails. If you catch what im throwin.

http://www.jbatvracing.com/images/misc/Six-Point-Sub-Frame2.gif
intruder
03-10-2005, 02:14 AM
Right side gets a longer bolt for the upper foot peg bolt that goes all the way through and a nut holds the lower leg in place. On the left side the lower roller holds it in place. Very strong mount. When you bolt to the fender brackets you run the chance of breaking them off. My son's had to be welded with just the fenders attached. The stock sub frame list for over $ 400.00 itself.
YFZracer22
04-04-2005, 11:22 PM
How much is the Herrmann one? They dont have it on their site???