PDA

View Full Version : Carb question


CrEaTiVeKiD18
03-07-2005, 09:01 PM
If i take aprt my carb to clean it do i need to get ,like a carb revuild kit or anything???
jiggaman2401
03-07-2005, 09:04 PM
You dont need one unless you want one to replace things but its not needed..
aviator4
03-07-2005, 09:45 PM
Be carefull with any gaskets and don't bent any needles!

Why does it need to be taken apart? The answer to that question may get you a better answer.
nosliw
03-07-2005, 10:33 PM
no you dont need a rebuild kit or anything like that. just take it apart, shoot it with some carbcleaner and air, put it back together.
CrEaTiVeKiD18
03-08-2005, 08:12 AM
The reason it needs to be taken apart is i ride in veryu dust or very muddy conditions and the other day i went to go start it and it started normal it got all warmed up then when i go to give it full throttle it boggs out like
2muchquad
03-08-2005, 12:15 PM
make sure your air filter is clean before you start troubleshooting:)
wilkin250r
03-08-2005, 02:19 PM
If you're really careful with all the gaskets, o-rings and such, you can probably re-use them. I've done it many times, and have never had a leak develop because of a bad seal.

This sounds like your first time rebuilding a carb. Spread a clean towel or rag before you begin and set all your parts on it. You don't want to introduce new dirt by placing your parts on a dirty table.