PDA

View Full Version : +5+1 A-arms



PBlackmon
03-07-2005, 12:55 PM
Should I go with Strongarm's +5 +1 LT setup are go with ATV Racing's +3+1 standard travel arms. Here's a pic of a warrior with the +5+1's. I don't have any pics of the +3+1's

JDiablo
03-07-2005, 01:07 PM
5+1's holy chit,lol

PBlackmon
03-07-2005, 01:19 PM
It's true. I was shocked when I found them too.

bradley300
03-07-2005, 01:38 PM
you'd be too wide with plus 5's. a stock warrior is 43 inches, so 10 unches wider is 53, 4:1 wheels would bring it in 2 inches. so your at 51 inches wide, AMA max is 50

Tommy 17
03-07-2005, 01:54 PM
Originally posted by bradley300
you'd be too wide with plus 5's. a stock warrior is 43 inches, so 10 unches wider is 53, 4:1 wheels would bring it in 2 inches. so your at 51 inches wide, AMA max is 50

if u don't tell anyone at the track i won't haha j.k bradley... noone would ever know i've never seen anyone checked at a local race...


+5 is insane!!!

Cody_300ex
03-07-2005, 02:39 PM
Go with the plus fives!

PBlackmon
03-07-2005, 06:35 PM
bump

hardkoratvmxr
03-07-2005, 06:38 PM
if oyu can stay inside the legal ama limit and since it is lt i would say get the +5+1

PBlackmon
03-08-2005, 11:34 AM
Well, they recommend 4:1.125 wheels for the +5+1 setup. I do not know exactly how much more that would move the track in, because I don't know that much about wheel offset/inset. Another question I have is, what offset or inset does the Holeshot MX tire and wheel package come with?? (I'm getting the 20x7x10s) and how much extra would I have to pay to get these type of rims for this setup?? If the wheel package offset is more than I need, then I'm thinking about just getting the +3+1s. Has anyone ever heard of ATV racing or have any experience with their products? Because that is the only company that I can find with +3+1 arms for my quad.
I really appreciate your help!

Ex_Rider43
03-08-2005, 03:19 PM
if you really want the +5 setup you should get +4-1 rims to get to the limit.


have you checked burgards?? I had a set on my 400 and they were great I would recomend them.

PBlackmon
03-08-2005, 07:49 PM
ttt

bradley300
03-08-2005, 08:35 PM
you'll be an inch wide with the plus 5's, even with 4:1 wheels. unless the actul width is 4.5 inches. i wouldnt get a .125 wheel, there paper thin

PBlackmon
03-08-2005, 09:56 PM
Does anyone know the offset or inset of the ITP wheels that come in the tire and wheel packages???

bradley300
03-09-2005, 07:24 AM
i would say you can get any offest you like

PBlackmon
03-09-2005, 09:50 AM
Can someone please educate me on wheel offset/inset???

quadrcr161
03-09-2005, 10:07 AM
Pblackmon, you planning on comming up and running the alabama atv only mx series?

watts16
03-09-2005, 02:23 PM
4+1-- is narrower than stock
4 inches on the inside ans 1 inches on the out side

3+2-- stock-
3 inches on the inside ans 2 inches on the out side


2+3 wider than stock but will put more stress on the front end and causes more bump steer
2 inches on the inside ans 3 inches on the out side


Hope this helps

R3Concepts
03-09-2005, 02:58 PM
I ran a pair of ATV Racing +3 arms on my 426ex, that they gave me and they worked awesome, no problems whatsoever, they are great builders and have been doing it for a long time, they also build 2 seat long travel sandrails that have artic triples and v-tec honda motors, trick work.

PBlackmon
03-09-2005, 07:19 PM
Quadrcr161: I'm planning on entering some runs at Perry Mountain, near Dallas County. I'm not going for pro, but I am going to enter a few local races. Plus, we have an MX track close to my cousin's house and my suspension sucks.

exracer16: Yeah, that helped a lot, Thanks

Cody_300ex
03-09-2005, 07:32 PM
Originally posted by exracer16
3+2-- stock-
3 inches on the inside ans 2 inches on the out side

Maybe on a yamaha, but on a honda its 3.5+1.5

quadrcr161
03-10-2005, 09:30 AM
Originally posted by PBlackmon
Quadrcr161: I'm planning on entering some runs at Perry Mountain, near Dallas County. I'm not going for pro, but I am going to enter a few local races. Plus, we have an MX track close to my cousin's house and my suspension sucks.

exracer16: Yeah, that helped a lot, Thanks

hey, i plan on trying to make a few runs at perry mtn also. on the mx thing, we are having a D class for people that dont jump and just trying uto the sport. we are also having a utility class at all the races. you should at least come out and watch, should be a huge crowd .

PBlackmon
03-11-2005, 07:50 AM
What is the date on that??

quadrcr161
03-11-2005, 07:53 AM
the series starts tomorrow at warrior, then the next weekend its in montavallo at TTT. see www.sequads.com for the whole schedule.

PBlackmon
03-11-2005, 10:12 AM
Hopefully, me and my cousin (known around here as BrandonBlackmon) will make it out to the Triple T (I live less than 2 miles form there) and to Perry Mountain at the end of the season. If we are lucky, we might get to checkout a few more races during the season.