Nate408
03-07-2005, 10:04 AM
just got 400ex running, new piston, and stage 2 hotcam.
everything runs good, but lean on midrange never hit wot, just running thru gears. So moved the clip down on needle one position. now to get it to idle had to go 2 turns extra rich on pilot screw. anyone had this happen, before moved needle idled fine. unless i moved the clip wrong way.
everything runs good, but lean on midrange never hit wot, just running thru gears. So moved the clip down on needle one position. now to get it to idle had to go 2 turns extra rich on pilot screw. anyone had this happen, before moved needle idled fine. unless i moved the clip wrong way.