Polishing

[400Rider022]

Can someone please tell me the steps for polishing and what i need i wanna polish up a few parts but dont no how :confused:

[Eddiesanders250]

i just bought the perfect stuff. its called maas. it works the best for any metal. use a soft cloth and rub it on for a long time then wipe it right off.

[muddy400EX]

i just use mothers aluminum polish, i used it on my HMF and its so shiny itll blind ya:eek2:

[dunepred]

here you go


http://www.exriders.com/vbb/showthread.php?s=&threadid=149649

[jsmith2232]

After working in a die shop for a few years i've learned that all you need to polish dull looking aluminum is.
1. Never dull ( in a silver can) it's a pre soaked cotton/abrasive polish. it does a nice job cleaning and de oxidizing the aluminum
2. 25,000 rpm die grinder with a 3 inch buffing wheel, rub "faboulous" aluminum polish on it and git er dun, it's in a hard stick form. polish and wipe off with a soft rag and it looks like chrome...

i did this with a set of rims i bought recently and from top to bottom it only took me just over an hour and with very mimimal hand work. they looked chrome when i was done.

pretty much any aluminum polish will work fine but for twenty bucks a cheap die grinder will take a ton of work out of it.

__________________