PDA

View Full Version : yfz 450 need more power help



dogmanjayx
03-04-2005, 08:15 PM
i need more power but dont want to spend to much money i have the full exhaust system fmf with the power bomb header pips , kn air filter with air box lid on also whent up to a 15 on front sprocket what can i do to get more power speed etc please help

Freestylemxr
03-04-2005, 08:20 PM
Do you want higher top speed or more torque? And where do you usually ride? MX or XC?

Doing the cam mod will give you a little bit, also a rev box will give you an extra 1000 RPMs up top

dogmanjayx
03-04-2005, 08:25 PM
i want more top but i dont want to take to much away from bottom

Freestylemxr
03-04-2005, 08:29 PM
The cam mod and the rev box will do that for you, you could always go to a higher compression piston, or get some porting and polishing done, but if you wanna stay out of ur engine for the most part do the cam mod, get a rev box, and if you want more snappy power and you do mx then go with some 18 inch tires, buut if you want high speeds then go with a larger tires for some xc style riding

ketchup
03-05-2005, 08:19 AM
Don't bother with a rev. box. Your bike isn't even making any more power in that RPM range. Scrap the airbox and get an ESR intake, cams or cam mod and get your jetting dead on.

Freestylemxr
03-05-2005, 08:52 AM
rev box's can make a big difference, gives you a lot of top end! a lot more on top of every gear

ketchup
03-05-2005, 08:59 AM
You have no idea what you're talking about. Look at a dyno. chart of a YFZ. Where is the power made at in the RPM range. I assure you it's not a 11.5k RPM's.