PDA

View Full Version : Air box lid


New450r
03-04-2005, 07:59 PM
I am not wanting to run an aftermarket airbox but was thinking of running a K&N lid or if someone wants to sell an HRC air lid I would like to know or any other ideas would be helpful
KEVIN132
03-04-2005, 08:06 PM
i like the kandn lids . but hole in yours with water deverter is a lot cheaper!!:)
beak7707
03-04-2005, 09:48 PM
If you look around on, ebay, and some of the other sites you should be able to find a HRC lid. I have seen a few sell for $10-15 bucks. So that would be alot cheaper than buying an aftermarket one. I have also seen a couple stock lids that people made into a HRC. All you have to do is cut that section out, and make a mud flap out of some plastic.
garett
03-05-2005, 05:35 AM
EHSracing.com they have the best lids i think i run 1, they are sweet ehsracing.com i ran 1 for my 400 and my 450r
benwa450r
03-05-2005, 07:04 AM
I took my HRC lid and cut the middle out about one inch from the edge all of the way around and covered the opening with a fine stainless screen rivoting around edges. It should breathe like the lid is off but keeps all of the grime off of the filter and most of the water out. Kept stock lid to wash bike with.:)
bigfoot300ex
03-06-2005, 07:36 PM
Originally posted by benwa450r
I took my HRC lid and cut the middle out about one inch from the edge all of the way around and covered the opening with a fine stainless screen rivoting around edges. It should breathe like the lid is off but keeps all of the grime off of the filter and most of the water out. Kept stock lid to wash bike with.:)
i did basically the same thing but now i just run without a lid
New450r
03-14-2005, 10:33 PM
I cut a few holes in the air lid and streched an outerwhare screen across it I think it will do fine when I rejet I will have to rejet anyway do to the K&N and the FMF full system I installed.I did a factory 4. What size jet should I run any way someone from here told me a 185 that sounds kinda big what do you guys think
Jersey450R
03-15-2005, 05:08 AM
heres the way i did mine running a uni filter and a 175 main. she runs awesome.
2001300exguy
03-15-2005, 02:17 PM
the ehsracing site hasnt been working for a while
03-15-2005, 06:25 PM
is that the Jason airbox cover edition :blah:
Jersey450R
03-15-2005, 07:16 PM
Hahahahaha.......no.
New450r
03-17-2005, 03:10 PM
The holes in mine are larger so I think I will try a 180 and go from there