American Star Racing PSP A-Arm set up

[4fiddyR]

Anyone running ASR Pro Star Plus A-Arms on there 450R? Mine are +2W, and +1 F.
They are totally caster, camber and toe adjustable heim jointed A-Arms. I was looking for someone who had them on and could give me a good base line on setting them up. How many turns on on the heims for caster, and same for the ball joints upper and lowers for camber. I need to get an angle finder and straight edge I know.
Setting the tow is not a problem, but the other stuff is a little tricky.
Thanks!

[MD450r]

I have the walsh setup on mine so its pretty similar to yours so Il try to help out. I would turn the lower hiem at the spindle in as far as it will go to the a arm and the hiems at the frame mount leave three threads out of the lock nut.

This will hopefully give you enough room so you can set up the castor and camber with the upper a arm. If not you will have to thread the hiems out on the lower a arms.

I cant remember which is castor or camber but set the one that is the relationship of the upper hiem to the rear of the lower heim first.

For more specifics on the degrees to set it at go to lonestars website.


Aaron

[R3Concepts]

Do not try to degree in an ASR front end off LSR's website, they arent the same, things dont work like that.

[4fiddyR]

I know about Lonestars site, but like stated here it is for using there A-arms.
I'm just concerned about what caster and camber setting to set them at.

anyone else have these A-arms???

[1_5_1]

i heard a lot of people having problems with the asr a-arms is that true?

[4fiddyR]

trouble setting them up? yes! no actual test rides yet.
What have you heard???