250xR#271
03-01-2005, 09:22 PM
I've been out of the loop for awhile, heck last time I loged onto this site was in 2003.
But I have two 350x motors I need to get rid of
1- has freshly rebuilt top end (two tanks of gas through it) w/ high compression piston, web cam's mild cam, hard welded rockers, and new clutches. If I sell it a Kehin 38mm carb, the 350x CDI box and oil cooler , powroll's 250x/350x instalation spacers, and a custom cobra exhaust would also go with it.
2- Needs top end rebuilt (piston and rings, the cam and rockers also need replaced). The head and bottom end are ok though.
So if anyone could please give me an idea of what these two motors are worth it would be greatly apprciated.
Thanks
But I have two 350x motors I need to get rid of
1- has freshly rebuilt top end (two tanks of gas through it) w/ high compression piston, web cam's mild cam, hard welded rockers, and new clutches. If I sell it a Kehin 38mm carb, the 350x CDI box and oil cooler , powroll's 250x/350x instalation spacers, and a custom cobra exhaust would also go with it.
2- Needs top end rebuilt (piston and rings, the cam and rockers also need replaced). The head and bottom end are ok though.
So if anyone could please give me an idea of what these two motors are worth it would be greatly apprciated.
Thanks