PDA

View Full Version : case saver question


atvrider12764
03-01-2005, 09:17 PM
does anyone know if you put a case saver on will the sprocket quard still fit over it?
DirtDevilBT
03-02-2005, 01:24 AM
should
bobbo97f150
03-02-2005, 07:37 AM
What's wrong with your stock steel case saver? I know the sprocket guard fits over that one.
dunebuggie66
03-02-2005, 08:17 AM
if you have a chain come off and go anywhere near the stock case saver it is going to be wasted, and probably rip the bolts out of your case, damaging it. believe me, i found out the hard way. i just ordered a case saver from golden west cycles.
KatHouseMouse
03-02-2005, 10:12 AM
contact J-H Racing918-371-0101 he has come up with a case saver that goes around and past the shifter.
bobbo97f150
03-02-2005, 03:53 PM
I dont see how the material of the case saver is going to effect the strength of the case where it attaches to the motor. An aftermarket case saver bolts on the same way the stock one does. If a chain gets lodged in between an aftermarket or stock case saver and your sprocket, it's still gonna bust the bolts out of the case. Aftermarket case savers are more for looks than anything else. Keep your chain under close watch.
Thump_It
03-02-2005, 03:56 PM
My aftermarket case saver is broken, and the strength of the bolts were tested, the top one bent and broke my case. The threads in the case itself are what need beefed up in my opinion.