PDA

View Full Version : 300ex oil cooler


rooster300ex
02-27-2005, 03:10 PM
How hard is it to install a jagg oil cooler kit for the 300ex, and what does it involve doing to install it.
Aceman
02-27-2005, 03:14 PM
They use an aftermarket oil filter cover for the inlet/outlet oil lines. So it would be nothing more than replacing the stock one with the Jagg and probably zip tying the cooler to the front frame rails. Really easy. Just make sure to fill the cooler up with oil before you connect all the oil lines.
rooster300ex
03-01-2005, 09:56 PM
has anybody on here ever installed a jagg oil cooler for the 300ex, so i can get a better idea of what i'm gettin into.
rooster300ex
03-02-2005, 12:03 PM
Does anybody know of another oil cooler that is made for the 300ex.
300exOH
03-02-2005, 12:09 PM
Four stroke tech makes a kit
beak7707
03-02-2005, 01:16 PM
My friend ran a jaggs on his 300ex. It was no problem to install and worked fine. I know four stroke tech used to sell one also, but I'm not sure if they still have them. Other people rig them up also. You can get one from a 350x or a parts store and hack it into your oil line.
hondardr4life
03-02-2005, 02:48 PM
FST still sells them. I just bought one for mine. All you have to do is cut your stock oil line, and clamp the rubber hoses onto it. But from the sounds of it, I would go with the jagg, if it makes it kinda like a 400ex where the line attaches right to the side of the motor. But it does sound like it will be a good bit more expensive. Mine costed $80.
standardryder
03-02-2005, 03:16 PM
duuuude i remember seeing an oil cooler for a 300ex like 3 years ago. and i have been searching for one forever! i was beggining to think that i was just my immagination that i saw it. does anybody have a link to where they sell them?
beak7707
03-02-2005, 04:05 PM
The Jagg one replace the stock oil filter cover and the cooler itself mounts to the frame tube. I would say they are the best but you are right, very high $$.
beak7707
03-02-2005, 04:07 PM
www.jagg.com Looks like they are $225 for the 300ex.
rooster300ex
03-02-2005, 06:37 PM
is there any drilling and tapping with the jagg oil cooler
Aceman
03-02-2005, 07:32 PM
No, it replaces your stock oil filter cover. The Jagg cover has 2 oil lines coming off of it. This mod is probably as easy to do as changing your oil.
hondardr4life
03-02-2005, 08:59 PM
Yea, $225 vs. $80.... Personally I would get the one from FST. It just zip ties to the frame kinda behind your front bumper. I don't think that I have ever seen a jagg cooler. FST doesn't have a website, you have to call them.
frosti108
03-02-2005, 09:09 PM
ya i have the FST oil cooler and it works great.

all you gotta do is cut the oil line and connect hoses to each side...

simple install