questions about my 14t sprocket...please help

[whiteflash]

i installed my 14t sprocket on yesterday and it wobbles a little, not much at all, but just a little. do you think when the chain is tightened it will not wobble. another question.... which side to i put the sprocket on. on one side it is flat and on the other side it bulges up alittle. the stock one had the flat side on the outside....if that makes sense. just making sure cause i dont want to break anything....thanks

[JOEX]

If it wiggles a little on the shaft that is normal. I don't remember which side goes in:ermm:

[2001400exrider]

mine has a VERY small amount of play and i also beleive its normal.

[shamisc]

Originally posted by whiteflash
i installed my 14t sprocket on yesterday and it wobbles a little, not much at all, but just a little. do you think when the chain is tightened it will not wobble. another question.... which side to i put the sprocket on. on one side it is flat and on the other side it bulges up alittle. the stock one had the flat side on the outside....if that makes sense. just making sure cause i dont want to break anything....thanks

Put the bulge to the inside and the flat side to the outside.

[400redneck]

if i can remember i thaought the sprocket said "in" on the on side

[wheeltrax]

mine said which side was in, but maybe not all manufactures say it.

[cals400ex]

yes, put the buldge on the inside. some companies say in and out on them, others don't.

[85atc350x]

Put the bulge to the inside. And yes, It is normal for the sprocket to wobble just a little.

[whiteflash]

put the sprocket in today and its way faster, pulls alot harder now. i looked in the owners manual and it says to tightent the axle bolts to 15 pounds with a torque wrench, i dont have one... is it nessary or should i take it into a shop were they can do it..i just tightened it tight with an allen wrench...

[85atc350x]

Don't take it to a dealer for that. Just tighten the bolts with the allen wrench from your tool kit.

[whiteflash]

thanks guys...