450r width

[infinite]

ok boyz and girlz i need some info. i got a x-33 durablue axle in back and burgard +2 in front. my question to u guys is i thought the front end was suppost to be alittle wider then the back. but in this case it isnt the front measures 47 inchs from end of tire to end of tire and the rear end measures 49 inchs end of tire to end of tire. is thise right? cause i cant adjust the front arms out and further but i can bring the rear hubs in but if i were to do that it will bring them in 2 inchs on each side which would make it 45 inchs in total width. please give me any suggestions will help alot.

[schulte_85]

what offset rims do you have on front, Are you measuring from the bottom off the front on the outside. Doesn't sound right. I have a +2 with 3+2 rims and it is right at 50 in front and 50 in back.:huh

[infinite]

from outside rim to outside rim and like i said the front measures 47 inchs wide with 3+2 offset and back is 49 inchs wide with 5+4 offset thats what i thought it should be equal right?