trans oil

[trx450jason]

How does everyone change their trans oil i haven't done it yet but it seems pretty hard. I'm not sure how i would get the to drain bolt to losen it enough to drain the oil out anyways:ermm:

[benwa450r]

I use a 12mm 6-point short 3/8 drive socket and universal joint and extension to loosen bolt. also remove 10mm check bolt and after oil is drained. reinstall 12mm bolt and pour oil in SLOWLY until it starts to come out of check hole. :D :D

[PADZZ]

The hard part is getting to the drain bolt IMO. I just use an extension. If you can change the oil, you can do this.

[RedRaider]

I just use a 12mm wrench and go behind the frame. once you get it loose you can take it the rest of the way out with your fingers.