PDA

View Full Version : mixture screw


Buffalo400
02-21-2005, 06:17 PM
Hi

I want to know if I turn out (to the left) the mixture screw on my 400ex stock carb, does my carb will be richer (or leaner)?


I don't find this anwser in the manual Owner.
Thank a lot!
BLEEDRED
02-21-2005, 07:05 PM
Richer.
44oEX
02-21-2005, 07:06 PM
yep richer
1fastR
02-21-2005, 07:08 PM
if you turn the screw clockwise (to the right) that makes it run leaner, counter clockwise makes it richer
RideRed250ex
02-21-2005, 09:24 PM
Originally posted by 1fastR
if you turn the screw clockwise (to the right) that makes it run leaner, counter clockwise makes it richer




lol...another "richer" would have done just fine. ;)
Dalex
02-22-2005, 04:50 PM
but is that only at idle or all the way throught the throttle?
LazeR
02-22-2005, 05:33 PM
Originally posted by Dalex
but is that only at idle or all the way throught the throttle?

mixture screw i believe is idle - 1/8th throttle
cals400ex
02-22-2005, 06:21 PM
the mixture screw plays the largest role at idle and tapers away after that. some consider it to work up too 1/4 throttle others say is stops near 1/8 throttle. i find the largest difference to be made below 1/8 throttle.



lazer, you still have the 400?
LazeR
02-22-2005, 07:47 PM
Originally posted by cals400ex
lazer, you still have the 400?


Yes i do, dunno what that message was during christmas :ermm: hit me up on msn when you get on!
cals400ex
02-23-2005, 03:48 PM
yeah, i will do that. that stinks with the bad message. i guess it is time to modify yours a bit then. :devil: