Gettin a 400ex to start in gear with the clutch pulled in?

[AtvKid4Eva]

i have a 400ex and when i bought it it has an aftermarket clutch perch with a p brake blockoff and it won't start in gear with the clutch in does anyone know how to fix that.......?

[tmccaughin]

the stoch clutch perch has a safty switch with 2 wires connected to it so when you pull the clutch in it will let you start the motor in gear so you either start it in neutral or buy a stock clutch perch

[blue416ex]

ok according to ^^^ there is 2 wires up there find them and either touch the metal in the one wire to the metal in the other and try and start it the same way youve been trying to (in gear with the clutch pulled in ) if it doesnt work try not letting them touch try experimenting with the wires and maybe touch one to the frame or both you will figure it out i have no clu how to thou just something i did with my blasters keyswitch:devil:

[TRAIL]

cut the ends off thw 2 small wires, strip them, twist them together, solder,crimp,tape them together and your good to go. BUT....it will start it or TRY to start it even without the clucth pulled in so be careful.

[zephead400ex]

^^^What he said.

[AtvKid4Eva]

i put the two wires together and indeed it will start with the clutch in the only problem is that with the wires tuching th nuetral light will never go off even when it is in gear what about that????

[TRAIL]

then something else is screwed up. I took my neutral and rev lights off of mine.

[Tattooed Trash]

Check to see if your neutral wire is still connected down by your shifter- If it is you'll need to disconnect it. You wont have a light anymore.