416 help

[LuckyCharms]

I'm looking at building a buget 416 and I was looking at a Ross 10.8-1 and a TC MX cam - do I need heavy duty head studs with this and anyone who has done this - what have you spent for these two items - I plan on doing the work myself and just getting the cylinder bored by a local shop

[crazyatvn]

416 you should not need heavy studs. But with the cam you might need to harden the rockers and run heavy valve spring you will have to check on that.

[cals400ex]

i actually run a ross 426 and a TC mx grind cam. i really like the setup. i may be parting my bike out in 2 months or so and if you want to buy the cam i would consider selling it. when i bought it from TC, he wanted $350 for the cam or $210 shipped if you gave him a good core cam. i would assume his prices are the same now. if your interested, let me know. however, i am not taking it out of the bike quite yet.

[LuckyCharms]

I would really like to do that but I did a compression test on it and I came out with 80lbs so its time for a rebuild - I would really like to just have to tear down the engine once to install everything instead of twice

[wes350x]

I have a je 10.8-1 416 piston with VERY VERY low hours on it Ill sell. email wes6500@ yahoo.com or pm if intrested. Save you lots of money