Tag T2 mouting help?

[400exBro]

i recently bought a set of Tag t2 with universal mounting kit, but the thing is that the mounting kit doesn't work... i got the mounts that have two bolts that mount to the clamp on top of the stem instead of one bigger one like on the stock 450r....
i was wondering what mounting kit do i need?(part number) pictures would help to....
any help or suggustion would be appericated.

[ryannotbrian]

ya, youre suppose to mount it to the stem first. once you mount the bottom section(clamp) to the stem, there should be a top clamp that goes over the bars. so you should have a section that adds about an inch your set up. hope that makes sense.

[Matt400ex_17]

I got some pro taper clamps for like $25 for mine that were the same height as stock. Just bolted right in. Not sure how to mount the tag my dealer said the pro taper were a better clamp. not sure why or how.

[bobbo97f150]

Originally posted by Matt400ex_17
my dealer said the pro taper were a better clamp. not sure why or how.

Cause they were in stock.

[mattonln]

lolol, the ironic part is its probably true!!!

[copter]

Since we're on the subject, what model number is stamped into the left grip area of your T2's. Mine is stamped with 1000 0680 but they are very short.. The box indicates they are for the 450r.

I used the 55 mm Longhorn clamps and the bars are quite a bit shorter than stock..

Help!!!

thanx

[400exBro]

i know how to put handlebars on... it is the bar mounts them self when i order i said i need the universal mounts for a trx450r, thinking my dealer would of got the right part... well i was wrong it looks like something for a dirt bike...
so i was wondering if someone had the right part number for the clamp i need, or any suggustion on a company that make clamps for pro taper style bars??
thanks

[copter]

Originally posted by copter
I used the 55 mm Longhorn clamps

Longhorn clamps (http://www.rockymountainatv.com/Product_Show.atv?cat=H&type=HANDLEBAR&name=Longhorn+Adjustable+Bar+Clamps&make=&model=&year=&status=&brand=)

[copter]

Originally posted by copter
Since we're on the subject, what model number is stamped into the left grip area of your T2's. Mine is stamped with 1000 0680 but they are very short.. The box indicates they are for the 450r.

I used the 55 mm Longhorn clamps and the bars are quite a bit shorter than stock..

Help!!!

thanx

Anyone?????????

[400exBro]

it is all good now. i have em mount, i just went back to the dealer and he helped me out...
thanks for the help...

[RideRedEX]

i just left the bottom stock clamp on the stem then put the bottom clamp from the kit on that which will also raise your bars about an inch