JxxxOxxxE
02-12-2005, 12:28 PM
We, my 85' 250R is finally about finished, but has now quit on me...I rebuilt the motor, new piston and rings, added a boysen rad valve, it has an FMF pipe, with a few small holes in it (dont have the $$$ for a new one yet), a PWK 39 mm with a 178, plus gap at .020, and I think thats it...
It has been running (not moving) for a for months now, so I finally got the chain and eveything put on.
I rode it lightly for about a week just up and down my road, and it felt pretty good. So I hopped on it Thursday, started up on the 2nd kick like always, and took off down the street, on my way back it started to sputter, then died and would not restart....I ended up pushing it back to the house...
I tried to start it again today, it started for a split second, sputtered then died. Now I can't get it to start again...
I checked the plug, I do have spark. I took the carb out and cleaned the jets well....what else is there to try
any ideas?
It has been running (not moving) for a for months now, so I finally got the chain and eveything put on.
I rode it lightly for about a week just up and down my road, and it felt pretty good. So I hopped on it Thursday, started up on the 2nd kick like always, and took off down the street, on my way back it started to sputter, then died and would not restart....I ended up pushing it back to the house...
I tried to start it again today, it started for a split second, sputtered then died. Now I can't get it to start again...
I checked the plug, I do have spark. I took the carb out and cleaned the jets well....what else is there to try
any ideas?