Pics of Denton to 300ex?

[m250r]

I've searched and searched and searched and i cannot find a good, up-close, detailed picture of how a Denton steering stabilizer is supposed to mount to a 300ex. I was told that the 400ex/250r is the same..is that correct? Thanks

[m250r]

help!

[bradley300]

they wont mount to a 300ex right, apparently the frame tubes are a different size between a 300ex and 250r. i bought a PRM baja bumper and mounted to that. i'll look for a pic and post it.

[bradley300]

heres the best i have, ditch the piece that goes on the frame

[m250r]

thanks man..do i just bolt it up to the steering shaft and there somewher on the frame?

[bradley300]

on normal quads, it bolts to the frame and then theres a circle mount that fits around the steering stem the you bolt the stabilizer to it. what i did was ditch the part that goes to the frame, when you take it off you will have a threaded piece and a nut left. drill a small hole in your bumper and mount it up.

[m250r]

did you find that it worked better that way than it would bolted up to the frame?

[sharkinthepool]

I have both, 400ex and 250R. Neither of them mount the same. I highly doubt that the 300ex/250x mount anywhere near the same way!

[Toadz400]

Wouldn't the 400ex/250R ones definately not bolt up to a 300ex because the 300 has square tubing?

[Out_Sider]

i have a denton stabilizer on my 300 and it went on just perfect to the frame

[m250r]

out sider..can i get a pic of where u mounted yours?

[sharkinthepool]

Originally posted by Toadz400
Wouldn't the 400ex/250R ones definately not bolt up to a 300ex because the 300 has square tubing?

UUUHHHMMMM!!!:ermm: Yeah! So are both of my 250R's

[bradley300]

yeah, 250x,300ex and 250r's all have square tubing. only aftermarket 250r frames are round

[ZSK]

This is the only way I could get mine to mount.

[m250r]

thats on a 300?

[ZSK]

Yeah it's a 300:huh

[sharkinthepool]

Yeah, NO OIL tank up front and No Radiator. Its not a 250R and it is not a 400ex or 450R and it has a honda side case!

[Toadz400]

The 250R frames have square tubing?? Weird...I was at Haydays this summer and saw a 250R frame for $75, but I don't remember it being square tubing and the 250R I rode didn't have square tubing...hmm...must've been aftermarket?:confused: