PDA

View Full Version : Dyno testing day


370kingR
02-07-2005, 06:21 PM
Chad, that bike is no doubt going to produce some more power once you tighten up that 1/2 inch valve lash!! lol just kidding..I had a blast and thanks to Harlan for letting us play on the dyno over at his place. I am going back to the drawing board, i want to get past the 40 ft lb mark myself. Mayby the numbers would be better up here in Joyzy :D :D :D

Oh by the way, it was the Trail Tech -4 flywheel that let me down. Beware of shifting magnets :mad:
the predator
02-07-2005, 08:38 PM
so what were your numbers?? was it at the crank or rear wheels?
370kingR
02-08-2005, 03:49 AM
My best pulls were 54 horse power and 37 ft lbs of torque at the rear wheels Predator. Feels like alot more when i drive it though. I have to crack the 40 ft lb mark some how.

King
the predator
02-08-2005, 05:53 AM
Nice....there is one with that kind of #'s in my area ....puts up an awesome fight :)
chad502ex
02-08-2005, 06:20 AM
hey 370kingR- can't wait till i get a chance to investigate and find out the valve train ticking issue. afterwards, it'll go back on the dyno for another round. how much was your Misto cam?

chad
atv13
02-08-2005, 06:31 AM
Chad, I read your other post on the 530 motor. What motor are you talking about? The 450r or 400ex? We have a 520= cylinder for the 450r. Just wondering if that was one of our kits or not.
Eric@NMOTION
chad502ex
02-08-2005, 06:37 AM
Originally posted by atv13
Chad, I read your other post on the 530 motor. What motor are you talking about? The 450r or 400ex? We have a 520= cylinder for the 450r. Just wondering if that was one of our kits or not.
Eric@NMOTION

eric what is your question here? i'm really not understanding it,...
atv13
02-08-2005, 07:46 AM
Did you make a 530 out of a 400ex motor or a 450r motor?
TURBO-530R
02-08-2005, 07:57 AM
Originally posted by 370kingR
Chad, that bike is no doubt going to produce some more power once you tighten up that 1/2 inch valve lash!! lol just kidding..I had a blast and thanks to Harlan for letting us play on the dyno over at his place. I am going back to the drawing board, i want to get past the 40 ft lb mark myself. Mayby the numbers would be better up here in Joyzy :D :D :D

Oh by the way, it was the Trail Tech -4 flywheel that let me down. Beware of shifting magnets :mad:


370kingR

How are the magnets held in ?

Glad to see you found the problem. Did they take care of it for free?

CRASH 508-EX











:devil: :devil:
chad502ex
02-08-2005, 08:32 AM
Originally posted by atv13
Did you make a 530 out of a 400ex motor or a 450r motor?

out of a 450r engine
TURBO-530R
02-08-2005, 09:11 AM
You think n motion would know what a 530 was?
370kingR
02-08-2005, 10:29 AM
Originally posted by CRASH508-EX
You think n motion would know what a 530 was?

LMAO Jim! Trail tech is making good on the shifty weights and we (Joe and I) had another one on order but now we want to wait and see if the new one is going to work....for at least more than a day!

Chad, that Mysto was $200.00 but like i said, i have another one (dont ask why) that id lend over to you if you want to try it out. I have the cam card to go with it as well.

Please let me know what the noise was when you find out. I really think there are some much better numbers in the near future for you my friend.

:chinese: hehe, i just had to add this little chinease guy, too funny.

Hey Harlan, thanks again for the hospitality. We gots to do that agian sometime. Mayby different pipes and different motors.

Gar
chad502ex
02-08-2005, 10:37 AM
Originally posted by 370kingR
LMAO Jim! Trail tech is making good on the shifty weights and we (Joe and I) had another one on order but now we want to wait and see if the new one is going to work....for at least more than a day!

Chad, that Mysto was $200.00 but like i said, i have another one (dont ask why) that id lend over to you if you want to try it out. I have the cam card to go with it as well.

Please let me know what the noise was when you find out. I really think there are some much better numbers in the near future for you my friend.

:chinese: hehe, i just had to add this little chinease guy, too funny.

Hey Harlan, thanks again for the hospitality. We gots to do that agian sometime. Mayby different pipes and different motors.

Gar

ok, thanks gary i appreciate your offer to lend me that cam to try. I'll shoot you and email with my shipping addy if i get the top end off and do not see and wear evidence. thanks again man