PDA

View Full Version : 400ex parts wanted



Troy15x
02-05-2005, 01:45 PM
I am still building my 400ex and I am looking for

HUBS
front & rear
stock or aftermarket


Shocks
aftermarket- MX

aftermarket seat latch

rear brake rotor--cheap

SPONSERS

sharkinthepool
02-09-2005, 10:38 AM
I got the rear hubs (stock)
And I got some Works shocks w/rezzies

Troy15x
02-09-2005, 07:09 PM
what do you want for the hubs?
How about the shocks?

I noticed you were from Ohio, where do you race? and what kind of races. I'm not sure how far away your located but there is a Harescramble at Sunset Ramblers in Gaion, Ohio on Feb. 20th and i have heard there is going to be a HUGE quad turnout.

Thanks

sharkinthepool
02-10-2005, 05:17 AM
We will be there this year but we do not run harescrambles. We run flat track, tt, and mx. We (my cousin and two more of our buddies, and extreme tec) all seem to show up at the races together.

Shocks, the pc needs re-done on the springs but other than that they are in great shape. I would take 250 for them. The hubs are still on the stock axle. They were run for maybe a month before my LSR stuff got here. I would take 40 for them.

blue416ex
02-10-2005, 03:32 PM
i got a custom axis rear dualrate 140-160 lb rider compression adjustable

Troy15x
02-10-2005, 03:47 PM
Sharkinthepool


My dad is on the board at Sunset ramblers so I will give you the schedule as soon as I hear anything.
Let me know when you are going up to race flat track because I would like to meet you and race with you. I am going to run alot of the flat track events this year. I race Big Bore Knobby and Open Quad, if I had slicks I would probally run Pro but I'm not planning on getting slicks.

I know the guys from extreme tec. also, actually my quad is in the shop right now. Jeff bored it out, threw on a cam and a big gun exhaust for me. I have Black Maier plastic but haven't put it on yet.

If you were at galion last year you probally saw me. i ran MX on the green mojave and took the points championship for small bore quad. I also ran a few flat track events on a yellow 400



Word has it there may be a TT track at Sunset this year.

sharkinthepool
02-11-2005, 05:06 AM
Nope I was running the fair races last year and did not make it to galion, too much rain, I actually would rather do Moto I know there are bad things that can happen on a moto track but I have seen worse and more severe on a flat/TT track. I look at it like a Nascar race. Everyone is in a big pack, it only takes one slip up to take a whole lot of people out!
I plan on doing most of the races up that way this year. No offense to D-11 but there tracks are not as good as D-12's. I like to venture to Beans every now and then. If we plan a trip do you want me to let you know about it.

If I would have known sooner that you needed slicks I just got rid of an almost new set of Hoosiers. 150 for the fronts and 200 for the rears on ITP .190's.

MXRACER91
02-15-2005, 02:58 PM
i have a omf seat latch for $25

redrider440
02-18-2005, 05:14 PM
I think sharkinthepool needs to go to Sunset Ramblers to race in a flattrack. It sounds to me like he don't have a clue about that type of racing.

blubyu
02-18-2005, 05:32 PM
Yeah, I race up there to and I've never seen you up there sharkoutofwater. I run the small bore with a solid built 265 Pro-Am, usually do pretty damn good.

112277
02-18-2005, 05:40 PM
looks to me like sharkinthepool knows alot about building badass quads i would like him to give me some pointers on my new 450r

redrider440
02-18-2005, 06:16 PM
Well 112277, 1st things 1st. You need to get you a Sparks X-6 full system, next you need to get the shocks custom from Laz at GT thunder, but they have to be long travel, then get a hold of Baldwin to get the Tim Farr special. Good luck.

112277
02-18-2005, 06:19 PM
sorry redrider but i would like to get some more educated advice so i will wait to talk to sharkmonkey or whatever his name is

redrider440
02-18-2005, 06:58 PM
thats cool, just thought I'd try to help you out.

sharkinthepool
02-20-2005, 06:03 PM
Originally posted by redrider440
I think sharkinthepool needs to go to Sunset Ramblers to race in a flattrack. It sounds to me like he don't have a clue about that type of racing.

Does your 440 have a Yoshi on it?

MT23
02-20-2005, 09:42 PM
160-170ilbsdual rate axis pm for more info...

sharkinthepool
02-21-2005, 05:42 AM
Originally posted by sharkinthepool
Does your 440 have a Yoshi on it?

Oups I guess not! Trying to find something else wheelie? Why do you got to be such a.....

sharkinthepool
02-25-2005, 07:49 AM
Troy15X,
Any news on the schedule as of yet? I know there are a few people that are looking for it.
I would have pmed you but you got it shut-down.

Thanks

Troy15x
02-26-2005, 06:11 PM
no i do not have the schedule. I have been putting pressure on my friends and my dad that are board members at the track.

As soon as I get it I start a new thred under RACING

sharkinthepool
02-28-2005, 05:22 AM
Cool man thanks, I have those friends that are really wanting to know.