do they make aftermarket rims Lt50

[komatsu kid]

just woundring if they make aftermarket rims for a Lt50,i dont see none in any books thanks

[77rigid]

If you find some let me know.I need some also.If I knew the bolt pattern I could cross reference it with another 3 or 4 wheeler.

[77rigid]

I forgot to tell you that I am putting LT 80 hubs on the front and running them.There is aftermarket wheels for the LT 80.I don't know if it will work on all LT 50's but it works on our 2003.You can use any year LT 80 hubs.The rear are not interchangable though.I hope this helps.

[komatsu kid]

thanks mines a 2003 too. maybe a person could make a plate so the lt 80 rims could fit in the back to?

[77rigid]

Just have to make sure everything is centered or it will ride like the axle is bent.I am guessing that since the front hub off a lt80 works,the widening kit from JL would work also.It bolts to the end of the a-arm.I will look for a used one to try this on.If you figure out something for the rear let me know.

[911]

there is a guy on e-bay who makes adapter plates for the trx90 to run 450r rims. you might be able to get him to do it. i made my own for my sons 90 and other sons suz 50 is in a lim class so rims cannot alter width. but i'll be doin it in acouple of years unless someone comes out with something

[77rigid]

So you are saying you can make these now.I would buy a set for the rear if you have an extra set.I need my 2003 LT50 to run LT80 wheels.What is the bolt pattern of the 50?Is it like 3x100mm or something close to that.Let me know.Thanks

[Livin4Real]

The little lt's are power stricken as is and I think going with bigger rims and tires your gonna lose even more power.

[77rigid]

I just want to go to 8in wheel so I can run 16x6.5x8 snow hogs(holeshot look-a-likes)

[Livin4Real]

yeah, I was wanting to do the same with our lt50, finally just gave up. You should get ahold of LT80 , I'm sure he has an answer.