how to set camber properly

[rap169]

anybody have an links tht would show how to set the camber properly? I bought burgard a-arms and im not quite sure on settin this up. DO i do it with the front end suspended? Or with it sittign on the ground? Or with my weight on it?

[400exrider707]

your weight on it cause thats probably how it will be ridden:D

[400exBro]

Bump...
i am in the same boat and need to know how much of any angle in need to put on the spindle?? I am running JB LT +2 3/8 a arms and will be set up for mx...
i have never setup a front end before and want to do it right the first time...
any help would be appricated.
thanks

[oldsandman]

Lone Star has a some good information on their site. lsracing

[400exBro]

thanks

[rap169]

thanks ill check that out

[R3Concepts]

LSR has good info on how to set up the bike, but do not use there specs for other arms and manufacturers. Setup the bike with it on level ground and the main rider on it, with full gear on.

[dunebuggie66]

i run from 2.5 to 5 degrees.

[400exBro]

4.5 degrees is for the gull wing style of a arms, wouldn't it differ for the Walsh/JB style of a arms??

i would like to know what others are running as of the walsh/JB style a arms??