Taking off plastics?

[keshon]

I got a twist throttle for my 2000 400ex and i got to get the gas tank off to put it on. I took the rear plastics and seat off but i can't figure out how to get the front ones off to get the gas tank off.
Can anyone tell me the trick to doing that

[44oEX]

there are 4 bolts. 2 are on the side covers. and the other 4 are under your fenders on the fender mount. you can pop out the clips that hold the side cover on the front fenders if you want but you don't have to. don't forget to turn off your gas before you take the tank out.

[brian-250]

ok, take your fenders off, throw them across the shop, take a flat head screw driver there should be 4 little black things that pop up with the flat head, take then out, pop the tank cover off, then unde the front fenders theres an upper and lower bolt (10mm) on both sides, take them out and pull all your plastic off then there are 2 small straps on the sides of your tank and 2 10MM bolts under the steering stem, after you take them out tilt your tankright and unhook the hose that goes to the carb and its off, i hope you understood what i was saying and i hope that helps.:D







that will $10 please:devil:

you dont have to take your front plastics off to put a twist in.

[johnnydufus]

its easier to get to the carb, but yes you can do it the old fashioned way like he said^

[rippen_honda400]

just take a look at your quad and then take them off it really isnt that hard

[44oEX]

Originally posted by rippen_honda400
just take a look at your quad and then take them off it really isnt that hard

before you reply to posts you should check the date on it. this post is 2 months old. I think he figured out how to take the fenders off by know