PDA

View Full Version : rear hub question


86250rrider
01-30-2005, 10:07 PM
are all years the same spline count and interchangeable? i want to put r hubs on my mojave to utilize my extra wheels and tires i have. and what years are same as 250x, 300ex,400ex? i know my 86 hubs dont work on the mojave,are the latter years different? THANKS AHEAD !:D
ESR250R
01-30-2005, 10:32 PM
they should all be the same, and i dont believe any 250r hubs are interchangeable with 400 and 300. i am not sure about the 250x.
trx310
01-31-2005, 09:26 AM
I am certain that all years are the same. Also, wrap the splines with teflon tape when you put your hubs on. It will push up into a ball between the hub and the stopper on the axle. This will help create tension and reduce wear on the splines and hubs.
nwi45
01-31-2005, 02:59 PM
Hmm, never heard of doing that but it sounds like a good idea.
JTRtrx250r
02-01-2005, 12:15 PM
only R (and ATC 350x) are 25 spline, no dice on the rest...
09-01-2005, 06:38 PM
Yes R is 25 spline not 24 like the 400ex and the rest.... wount work.
wilkin250r
09-02-2005, 10:25 AM
Originally posted by JTRtrx250r
only R (and ATC 350x) are 25 spline, no dice on the rest...

I thought the 350X and 250X had the same splines. Of course, considering the source of my information, I could very easily be wrong about that...
JTRtrx250r
09-02-2005, 01:26 PM
Originally posted by wilkin250r
I thought the 350X and 250X had the same splines. Of course, considering the source of my information, I could very easily be wrong about that... my 86 350x were 25'er's, just about every Honda has 24, even Ody's, I just cant seem to remember if they're off-set hub-fingers... or flat like the R's:o :D