13 tooth sproket?

[Mike545]

i know it will wear the chain out eairlier but, i run 22's on my bike and 14/39 gearing, and in some tight trails it bogs and or i have to feather the clutch alot, these are rough rock trails, slow speed. in process of the heavier flywheel. any ideas? top speed isnt a concern, its still plenty fast.

[2manycrashes]

go with either the 14/40 (less drastic)or a 13/38 (more drastic)

most people run the stock rear and 13t on the front.

[lilredridenwood]

I run a13t and i like it in the tight stuff, with 22 inch tall tires you will like it alot better also

[Punk'd]

I love my 13T its perfect and i bet with 22's it will be even better

[Mike545]

it seams to do ok, with the 22's 13/39. i didnt know they had a 40 for it. just want to make tight trail s eaisier.

[wanta450]

I have herd good things about the heavier flywheels if you didnt get it yet i would try it first JMO:confused:

[Mike545]

thanks, where do you get the 40t rear? did any one try the 12t?

[Gregg C]

I just ran a 12 / 40 for a tight quiet trail in a very long box canyon up in the Jemiz mountains...
The "R" was awesome !!!
We did some very slow tech riding and I had total control with no lugging, banging or knocking. What a great day !!
Stock chain worked fine with pleanty of adjustment.
Got the 40t rear at
http://www.magicracing.com/home.asp

Gregg

i'm running a 13T front with stock rear. Although, i've been thinking about going back to the 14T and getting bigger on the rear. It's always better to go bigger on the rear. Going smaller on the front puts the chain on a tighter bind, thus shortening it's life.

[dead eye 00]

what is the stock rear 38 or 39?

[Mike545]

38, since i run 22's the 13t is putting me back to stock. the 12 should put me good for tight trails. i run a 39 stainless, wish i knew about the 40

I have stock 14 tooth and 22" rear tires on mine and before I was always feathering the clutch but now that I have my aftermarket exhaust I don't have to do that anymore....you should check out into that

[Mike545]

I have the new flywheel 8oz heavery, putting it on sat. am looking into the end cap and jet thing from ebay

[flattrack450]

kinda off subject, but do the ex and r share the same sprocket hub. will some day have to say goodbye to the ex, just wondering if all my rear sprockets will be a swap.

thanks...

[holeshot19]

put u a hotcam stage 1 and dyno jet kit in it then it will lug and u want have to clutch it so much

[Mike545]

so you recomend stage 1, and end cap mods? what would the top speed be like?