View Full Version : stabilizer
T2RACING
01-27-2005, 03:47 PM
Got a PEP stabalizer today off someone It didnt have any instructions with it does anyone have one and if so how is it hooked up>>>:confused:
team_450_88
01-27-2005, 07:17 PM
It goes to the steering stem and the other mount goes to the frame rail...u can tail by looking at it pretty much..the end u adjust how hard or soft u want it goes to the frame rail other to the stem !!
the Z Man
01-27-2005, 07:29 PM
Here is apicture of mine, if you look close you can see how she installs. Z.
450 Racer R
01-27-2005, 07:45 PM
the square end goes on the frame right up against the motor mount on the right (brake) side. the piston goes inside the frame and under the radiator. The round end is mounted to the steering stem six inches up I think. and that's it. there's a brake tab there that you might have to bend, just pry it with a screw driver and it'll be good.
T2RACING
01-27-2005, 08:05 PM
Sweet ... Thanks for the info guys .. I will get her mounted tomrw..
By the way Z man what graphics are those..??
the Z Man
01-27-2005, 08:06 PM
New style One Industries,,, her eis a side view.
400exvet
01-28-2005, 07:19 AM
I didn't want to move all the brake lines and it is a pain if you have full nerfs. So, I welded the bracket to the front bumber where it is easy to get to but still protected.
trout
01-28-2005, 07:37 AM
NICE!
nothing like a little good ol' inovation.
necessity breads inovation they say.
trout
trout
01-28-2005, 07:38 AM
Originally posted by 400exvet
I didn't want to move all the brake lines and it is a pain if you have full nerfs. So, I welded the bracket to the front bumber where it is easy to get to but still protected.
so do you like it? how does it work?
trout
400exvet
01-28-2005, 07:45 AM
It works great and is easy to adjust, keep tight, lubed and clean. I am thinking of putting another one just like it on the other side and have them criss cross? ....dual stabilizers dude!:macho
kargaaro
01-28-2005, 02:33 PM
I've bent a bumper all the way to the frame from hitting a tree that didn't even throw me off. That's an expensive fix.
bobbo97f150
01-28-2005, 03:29 PM
Originally posted by kargaaro
I've bent a bumper all the way to the frame from hitting a tree that didn't even throw me off. That's an expensive fix.
Even worse, it could end your race or set you way back while your trying to remove the mangled stabilizer/bumper combo. If he's into racing that is.
400exvet
01-28-2005, 04:05 PM
I've XC raced that quad with that stabilizer about 12 times now, 2 of them GNCC's. The bolt cam off 1 time which made alot of noise but didn't affect my finish and I have sheared the top bumper bolts off by hitting a guy that hit a tree...again it did not affect my finish. Don't get me wrong, I have hit many trees. But my hits tend to stay out on the tires.
If I hit a tree hard enough to send that bumper back to the frame...the last thing I am worrying about is the stabilizer.:D
dirtriderex
01-29-2005, 07:35 AM
Dang, what the he*l kind of bumper are you guys running??
T2RACING
01-29-2005, 11:41 AM
Does the wheels need to be turned a certain way when installing it or straight forward...>:confused:
T2RACING
01-30-2005, 03:45 PM
ttt
dn1911
01-31-2005, 08:29 PM
Originally posted by dirtriderex
Dang, what the he*l kind of bumper are you guys running??
i don't know about the other guys but my Pro-Tect bumper hit a brick wall and only bent, after it sheared two bolts. the guy was able to fix it for $20. people that hit stuff shouldn't buy aluminum bumpers!
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.