Post Your Handlebar Setup

[ravage3000]

Like it says...post a pic of your handlebar set up..clean pics if possible..

[NacsMXer]

Here's the only pic of mine that I have thus far: Tag T2's - SX bend, Scott Hurricane Grips, ASV rotator clamp, ASV front brake lever, Nac's Billet throttle and master cylinder covers, and a Magura hydraulic clutch. I'm considering switching to a much higher Fly Aero Taper Mini Works bend because I still feel a bit hunched over with my stock steering stem.

http://www.imagestation.com/picture/sraid152/pe0e97f5c7f980cf2652d90a5e58c2491/f5af1b15.jpg

[ravage3000]

:eek: ..HOLY DYING LOOK AT THAT BEAST!..keep it coming people..i'll have a pic of mine asap but its stock :(

[ravage3000]

I'm considering switching to a much higher Fly Aero Taper Mini Works bend because I still feel a bit hunched over with my stock steering stem.

Then maybe you should look into this, it will raise the bars 1 inch

http://www.mooseracing.com/index_HTML.jsp?link=4&catinfo=yes&a=products&action=Q&product_group_id=208&category_title=Controls&category_id=788&parent_id=777&parent_title=ATV%20Hard%20Parts&product_name=UNIVERSAL%20HANDLEBAR%20CLAMP%20KIT&group=

[BamaRider]

I just put these on last week. I think it would have looked better if I would've sprayed my clamps black. Should I pull them back off and spray 'em?:confused:

[NacsMXer]

Originally posted by ravage3000
Then maybe you should look into this, it will raise the bars 1 inch

http://www.mooseracing.com/index_HTML.jsp?link=4&catinfo=yes&a=products&action=Q&product_group_id=208&category_title=Controls&category_id=788&parent_id=777&parent_title=ATV%20Hard%20Parts&product_name=UNIVERSAL%20HANDLEBAR%20CLAMP%20KIT&group=

Thanks for the comment, i'm glad you like it. Oh and I already have those, they are the standard adapters that are required for any type of fat bar. I believe the ones i have from Tag raise the bars 3/4 of an inch from stock. I'm also considering Rox risers, but my plan is to get some higher bars, and then get a +1 stem when this temporary stock stem gives out on me.

[Myrtle150]

http://img.photobucket.com/albums/v653/Myrtle150/quad011.jpg
theres my tapers

[ravage3000]

Should I pull them back off and spray 'em?

nahh i think they look pretty sweet the way it looks now

Myrtle150 and BamaRider could you give us a description of what you have for your setups?

[Rico]

FMF 909

[ravage3000]

what bend is that and could you describe your set up

[theTman]

Renthal CR high bend

[theTman]

wferg

[400exrider707]

I put a set of renthal 250R bends on my stock stem for my 400, and it raised it up quite a bit, I like it a lot now. Ill see if I can snap a pic of it tomorrow.

[Rico]

Originally posted by ravage3000
what bend is that and could you describe your set up

I believe it is just the Standard ATV Bend. Those bars are about 3 years old and FMF has released more types of bars for Quads so i can't really say exactly which ones they are.

[Tommy 17]

renthal 400ex bend...

[ravage3000]

ooooo this is getting good :D

[DGR]

This is mine

http://www.imagestation.com/picture/sraid156/p04a453a202c019b141d47577881447cd/f5534048.jpg


Pro Taper SE bars CR-high bend
Renthal medium ATV grips
MSR Cr250 clutch lever
Motion Pro cables
PowerMadd yellow handguards
Now with a Pro Design kill switch

I like it a lot, i'm only 5' 5" tall and it suit me perfect :blah:

[ravage3000]

theres no pic

[ravage3000]

DGR nice bike ;)

[TRAIL]

mine.

[TRAIL]

another

[muddy400EX]

dang, you all got the nice bars. i got the cheapy msr's cuz im po'. i dunno what bend they are, i just bought the lowest ones that at my dealer, i like em low cuz it feels like i have more control over it:macho i love them tags and pro taper bars.here's the best pic i got:huh msr bars with scott grips
http://img.photobucket.com/albums/v433/dirtbiker/400-1.jpg

may be cheap but they work:)

[muddy400EX]

i got a question, how does the pro taper and tag square shaped pads go over the mount bolts. does it just fit right over the stock ones?:confused: my pad barely fit on there cuz there so low:eek:

[wheeltrax]

are the aftermarket 400ex bends a pretty comfortable bar? I am looking at getting new bars cause my flys are bent incredibly bad. I had some renthals on my 250x that were really really low and i hated them. I just dont want to buy a set and hate them..

[ny300exrider]

400ex bend bars are comfortable, i liked my renthals on my old 400 alot

[ravage3000]

TRAIL what kind of bars are those and what bend are they?

[quadmxracer]

Here's mine, CR Double High Renthal Fat Bar.

http://www.imagestation.com/picture/sraid156/p214d5bd2176137829d4364271a7fd677/f550aa1e.jpg

http://www.imagestation.com/picture/sraid156/pe93010cb0337ea958cca550d62140ca4/f550aa1c.jpg

[crazyatvn]

Here is my setup. I think it is protaper cr high. I would not bet on it though.

http://img.photobucket.com/albums/v642/crazyatvn/DSCF3759.jpg

[F-16Guy]

Trail Tech X-Bar and clamp--


http://www.imagestation.com/picture/sraid105/p61c58733ff1381911b30c15176ceba38/f981a042.jpg

[brian-250]

i got MSR atv high bend's witha moose perch and lever, some tweaking to the stock break lever, and a trans red throttle and master cylinder.:cool:

[ravage3000]

F-16Guy, your set up looks high, are the clamps taller than stock or something because i like it :D

[jiggaman2401]

heres mine tag t2's with powermadd handguards..

[400sEXridr]

crazyatvn u seem to b missing a gas tank

[crazyatvn]

Hey thanks I guess that is why it will not start! HAHA

No I am in the middle of a rebuild.

[98red]

here is mine

[ravage3000]

what kind of set-up do ya have there?

[98red]

one more....these are cr high bend fat bars with the Trial Tech bar clamp

[JDiablo]

my setup Flexx bars,KX kill switch,pro armour kill switch,magura hyrdo clutch

[JDiablo]

2. just installed the killswitches today,made a chit load of room that i need now for the stupid handguard mount

[JDiablo]

last one the garage isnt that messy,lol

[ravage3000]

98red, how do you like your set up, looks pretty comfy..

last one the garage isnt that messy,lol
nooooo what makes you think that :D

[JDiablo]

lol haha im actually about to go "straighten" it up in a lil bit so i got a nice good place to work on my engine

[400sEXridr]

300exrida what kind of plastics are those. those are sick

[theTman]

Originally posted by 400sEXridr
300exrida what kind of plastics are those. those are sick

fullbore

[JDiablo]

Originally posted by theTman
fullbore

yup

[98red]

ravage3000..today was the first day out with it ( it's been one of those winter rebuild)I love the set up...glad I got the cr high bend, I am 6 ft. tall and it was alot easier for me to stand up. The ASV levers are great... I can use just 2 fingers now to pull the clutch in.

[ravage3000]

ravage3000..today was the first day out with it ( it's been one of those winter rebuild)I love the set up...glad I got the cr high bend, I am 6 ft. tall and it was alot easier for me to stand up. The ASV levers are great... I can use just 2 fingers now to pull the clutch in.
right on .. i think im gonna go with the same set up but get Moose silver Flex Series bars, cheapest fat bars to buy here in n.b.

[98red]

I only paid 48.00 at RC

[ravage3000]

cheapest fat bars to buy here in n.b.
i live in New Brunswick Canada .. Moose Flex Series bars are $89.95 plus tax .. TAG T2 are $129.95 plus tax .. if i get the Trail Tech clamp ($122.99), Moose bars ($89.95), and Smith grips ($12.95) it comes to $210.80 .. the TAG's are $40 more, but i cant aford that

[sportraxkid]

I have Renthal 400ex bend bars with Renthal grips. ;)

http://www.imagestation.com/picture/sraid159/p2788547174d248f487080b27c1677afc/f4f9177d.jpg

[Gillbilly]

98red,what are you running for a steering stem?Im 6ft also was thinking +1 wiith cr high bend.

[98red]

Gillbilly, I am using the stock stem.It is a little taller now than it was. I wanted to get the cr double high bend but they were on backorder so I got these instead.A +1 stem with these set-up would be even better for a tall person. When I rode the other day it was alot easier for me to stand up.

[Gillbilly]

thanx!

[b400ex]

ive got pro taper se w/ fac. 909 grips

[ravage3000]

..

[Buster]

just got the 400 a couple weeks ago. I put a set of T2 CR High bend on with tag fat bar adapters and I really like it. I'm 6ft and IF I ever need a new stem I may go with +1. I really like these bars with the twist grip and powermadd guards on..


2004 400ex (my first sport quad)
Pro Armor nerfs
PRM skids all around
PRM Baja grab bar
AC bumper
T2 bars with twist
CFM Airbox/Uni
OMF scoops

exhaust/engine mods coming this spring. can't wait!

[spaz416]

http://www.imagestation.com/picture/sraid152/p73559bae0c802cc77db0ca330cf8fc50/f5b39755.jpg

there is a pep ez pull on there, you just can't see it in that picture. i plan on getting some type of barkbuster handguards in the near future.

my powermadds im gonna get sone renthal 400EX bends but budgets a little tight at the moment:o

http://img.photobucket.com/albums/v312/kwiatkowski/quadphotos004.jpg

[ravage3000]

anybody else?

[Jersey450R]

Trail-Tech Standard bend X-bars. Smith watercraft grips (they are AWESOME). I have a magnum perch on it now also. Its a 450 but you get the look. The Trail-Tech bars are rated higher than Pro-Tapers.

http://www.imagestation.com/picture/sraid163/pe181b4d1cb70bea76f63784cf3ce90d5/f491392b.jpg

http://www.imagestation.com/picture/sraid163/p6ff54a6b2be78f48614633ad2f3e8a92/f4913922.jpg

[jt29]

Originally posted by NacsMXer
Here's the only pic of mine that I have thus far: Tag T2's - SX bend, Scott Hurricane Grips, ASV rotator clamp, ASV front brake lever, Nac's Billet throttle and master cylinder covers, and a Magura hydraulic clutch. I'm considering switching to a much higher Fly Aero Taper Mini Works bend because I still feel a bit hunched over with my stock steering stem.

http://www.imagestation.com/picture/sraid152/pe0e97f5c7f980cf2652d90a5e58c2491/f5af1b15.jpg

On the ASV levers do you have the standard levers of the shorty's.

[ravage3000]

very very nice:eek:

[ravage3000]

anymore?

[maxamillion]

these are magnum cr low bars with oury grips and an RTC clutch perch/lever

http://www.imagestation.com/picture/sraid166/pf90a41fdc6209eafc85aed4ae882a3ba/f4498fa4.jpg

http://www.imagestation.com/picture/sraid166/p1e78dee37b32111dbf4782b4691b0463/f4498fb1.jpg

[ravage3000]

lookin good;)

[ravage3000]

heres mine
http://img.photobucket.com/albums/v200/ravage3000/HPIM0102.jpg
stock :(

[Sportrax10]

Cr high Tag T2's

Burgard +1 stem

RTC Clutch lever...

[ReconRider25]

heres mine. moose racing alloy bars(cr high bend) xr clutch perch with moose racing lever and quick adjust nut, powermadd handguards, scott hurricane grips, and tether killswitch. everything else stock.

edit: forgot the pic. here it is.
http://www.imagestation.com/picture/sraid166/paa15495e2a69615d2e216141fcaa954b/f450e091.jpg

[lil400exdude]

tagssssss

[ravage3000]

...

[400EXdude]

Tommy 17 has attached this image:





man thats a sweet *** quad are those stock red plastics?.,..also what graphics are those?

[400EXdude]

sorry i dont think pic. posted but still you should know

[chris400]

.

[ravage3000]

lookin good

[400EXdude]

tommy 17 are those stock red plastics on that 400...also what graphics kit is on it...any other pics?

i know this post was awhile ago but i just say it lol

[darkstar]

I think tag bars are the best the have a nice bind to them

[yamablaster24]

i like my bar setup :D
now it has ASV levers on both sides, kx front master cylinder, and i bent the stem so im looking for aftermarket, prolly +1 arens

Renthal Fat Bars tanium color
Vortex 7mm rise Billet Antivibe Clamps, Renthal Bar pad, ASV clutch Lever and perch, Kx Kill switch for starter and master cylinder perch, ASV shorty brake lever (both ASV's are unbreakable) Pro design kill switch, pro grip grips,
http://img.photobucket.com/albums/v634/yamablastermx/Explorer400022.jpg

http://img.photobucket.com/albums/v634/yamablastermx/Explorer400021.jpg