No spark again

[JDiablo]

OK guys i posted this over the weekend and i thought i figured out what the problem was,but i guess i didnt i went to my local dealer today and bought three new spark plugs.Well the thing was i thought it was the spark plug that went bad because im getting power to the spark plug end cap,and no power from the spark plug,well i install the new plug,still same thing,i take the plug outta the cap,and stick my negative tester into the spark plug cap,and the posotive one to the start relay and it says 12+ volts...im stumped at this one,what can the problem be>?

[JDiablo]

BUMP!

[416exmx]

you dont have these problems with CRF motors...:eek2:

[JRDrider22]

does your batter kick over?

[JDiablo]

does it turns over and there is some compression,i checked the whole wiring system at least five times if not more,im getting power to the spark plug cap,the inside,but doesnt get to the spark plug somehow:huh

[motoboy66]

i would try a new plug cap. I think there is a resister in there that may have gone bad. just something to think about

[Cody_300ex]

i think its a operater error. :(

[JDiablo]

Originally posted by Lil_300Ex_Kid
i think its a operater error. :(

ehh i think my exhaust bearings went :o






:devil:

[JDiablo]

Originally posted by 416exmx
you dont have these problems with CRF motors...:eek2:

well i see in your sig you like to buy new and used quads and parts....interseted in my piece?:)

[JOEX]

Check the connection from the cap to the plug. It may be too loose, try crimping it a bit then put the cap on the plug.