broket jet

[etter696]

any suggestions on gettn a broken jet outa the carb:grr: its a roundslide carb of a 250r

[Mxjunkie]

easy out?

[etter696]

thats what i was thinking is there anything i can hurt above the jet

[Mxjunkie]

Originally posted by etter696
thats what i was thinking is there anything i can hurt above the jet

id deff make sure you clean scraps etc out of it but the only thing really would be the needle if im not mistaken..

[etter696]

thanks

[dober250R]

try jamming a flat head screwdriver into it, that's how I got mine out. I've busted a few, i hate easy outs, they never work.

[zephead400ex]

Get something small that's tapered, I have used an awl, and put it into the head of the jet. Then just unscrew.

...or did I misunderstand the problem?

[jvd182]

they brake to much.. so the threads are still in there right.. take the jets complely out and use a screwdriver other than a flat head and it wil come out easally

[Rocketman250r]

It kind of depends on how tight the jet is stuck in there, but I have used a sheet metal screw. Screw it into the jet, put a little locktight on it and let it set a while, then see if you can back it out with the screw. Just go easy with the locktight, you don't want to much of it in there.

[F-16Guy]

Maybe you can use a Dremel to carefully gring another slot in it for a screwdriver?

Ironically, I make my living fixing broken jets, but that's the best I can do.:confused: :D

[JOEX]

Originally posted by F-16Guy
Ironically, I make my living fixing broken jets, but that's the best I can do.:confused: :D
LOL!:p