View Full Version : 38MM air stryker
CorvetteZ06
01-24-2005, 05:08 PM
Hey guys, I just got a used but mint 38 air stryker carb. I have a 265cc Duncan national motor. I am running a K@N without lid. My question is, what size jet should i start out with? Thanx.
machwon
01-24-2005, 05:35 PM
Here is what we use at 700ft above sea level.
For winter riding 30 degree's F:
DGH needle middle notch, 48 pilot, 185 main.
In the summer 70 degree's F we use:
DGH middle, 42 pilot, 178 main.
I would start with a 52-55 pilot and 190-195 main, go down from there as necessary.
CorvetteZ06
01-24-2005, 05:38 PM
Bob-- Thankyou for the reply... I am located in Jersey, so i am not sure my altitude... do you know what it is... or is there some where i can find out? thanx.
machwon
01-24-2005, 05:43 PM
I usually go here, enter the town and state I think. That should get you your elevation.
http://www.topozone.com/
CorvetteZ06
01-24-2005, 05:54 PM
ok, it said around 250ft. So, should i still start around the size you recomended? thanx!
machwon
01-24-2005, 06:01 PM
Yes, that should be a good place to start.
CorvetteZ06
01-24-2005, 06:02 PM
thankyou for the help, i apreciate it!
Powered by vBulletin® Version 4.2.1 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.