Aarron
01-22-2005, 12:12 PM
Powertrain, engine & other work:
Engine is bored .040 over w/ Wiseco 11:1 high perf piston
Head is ported and polished
WB Stage II cam
HMF headpipe
New T-4 Pro Circuit aluminum exhaust (new style with end cap)
New stainless steel hight flow airbox w/ lid (all parts are stainless)
K&N airfilter w/ outerwear
properly jetted for pipe and high flow airbox
New o-ring chain (chain is red to enhance looks)
14 tooth front sprocket
New swingarm bearings
New rear axle bearings
New front wheel bearings
New steering stem bearings
New sparkplug (hotter plug added)
New battery
New solenoid
New throttle cable
New brake cable
New brake line
New clutch cable
Lonestar +2 rear axle w/ spacers (currently at +4)
OMF air scoops
Extra auxiliary oil cooler added
Other extras:
aluminum brake pedal
aluminum shifter
New FMF red shock covers
Graphic and seatcover kit
Standard AC nerf bars w/ brand new black nets
AC bent-back style front bumper
New AC full body skid plate
New White Brothers swingarm skid plate
Renthal handlebars
Tether kill switch
New .190 Douglas high polished aluminum rims (same size as stock)
4-ply Maxis razor tires all around w/ 80-85% tread
Also included:
1. Brand new never used 416 Wiseco 11:1 piston kit and Cometic gasket set. Everything needed to bore to 416.
2. Bottle of K&N air filter cleaner and oil.
The 4-wheeler has not even been ran on the new Douglas rims. This 4-wheeler was an impulse buy, but i now i feel was a mistake. I should have spent the money on finishing my basement. Anyway, it is in great condition, has much power and runs excellent. I am the 2nd owner and added most everything listed. Honda did engine work, replaced chain & bearings. I installed everything else. Oil & filter was changed. I only put about 10 hrs on this thing. I ran 89-90 octane fuel w/ carburator cleaner each time i rode.
I will sell if i get the right price. Just curious to see what i would be offered or what price i should start. Any bids?
I can take pics if your interested. Just e-mail me at marshall@gcctv.com.
Thanks!
Aarron
Engine is bored .040 over w/ Wiseco 11:1 high perf piston
Head is ported and polished
WB Stage II cam
HMF headpipe
New T-4 Pro Circuit aluminum exhaust (new style with end cap)
New stainless steel hight flow airbox w/ lid (all parts are stainless)
K&N airfilter w/ outerwear
properly jetted for pipe and high flow airbox
New o-ring chain (chain is red to enhance looks)
14 tooth front sprocket
New swingarm bearings
New rear axle bearings
New front wheel bearings
New steering stem bearings
New sparkplug (hotter plug added)
New battery
New solenoid
New throttle cable
New brake cable
New brake line
New clutch cable
Lonestar +2 rear axle w/ spacers (currently at +4)
OMF air scoops
Extra auxiliary oil cooler added
Other extras:
aluminum brake pedal
aluminum shifter
New FMF red shock covers
Graphic and seatcover kit
Standard AC nerf bars w/ brand new black nets
AC bent-back style front bumper
New AC full body skid plate
New White Brothers swingarm skid plate
Renthal handlebars
Tether kill switch
New .190 Douglas high polished aluminum rims (same size as stock)
4-ply Maxis razor tires all around w/ 80-85% tread
Also included:
1. Brand new never used 416 Wiseco 11:1 piston kit and Cometic gasket set. Everything needed to bore to 416.
2. Bottle of K&N air filter cleaner and oil.
The 4-wheeler has not even been ran on the new Douglas rims. This 4-wheeler was an impulse buy, but i now i feel was a mistake. I should have spent the money on finishing my basement. Anyway, it is in great condition, has much power and runs excellent. I am the 2nd owner and added most everything listed. Honda did engine work, replaced chain & bearings. I installed everything else. Oil & filter was changed. I only put about 10 hrs on this thing. I ran 89-90 octane fuel w/ carburator cleaner each time i rode.
I will sell if i get the right price. Just curious to see what i would be offered or what price i should start. Any bids?
I can take pics if your interested. Just e-mail me at marshall@gcctv.com.
Thanks!
Aarron