wishmasstir
01-20-2005, 11:37 PM
i have a duratrax axis torq .21 1/8th scale 4x4 buggy for sale
everything is completely stock from the factory except for the air filter....no adjustments have been made to the car to alter anything
it was always ran at 230-240 degrees and always ran blue thunder 20% fuel in it
this buggy has less than TEN TANKS RAN THROUGH IT
i'll take $200 ... payed $375 ... my loss
you'll need fuel/igniter/12 aa batteries
SPECIFICATIONS
Length: 17.7 in (450 mm)
Width: 12 in (305 mm)
Height: 7.9 in (200 mm)
Front/Rear Track: 10.3 in (260 mm)
Wheelbase: 12.8 in (325 mm)
Ground Clearance: 1 in (24 mm)
Weight: 7.3 lb (3240 g)
HiTec AM 2-Channel Pistol-Grip controller
HiTec AM 2-Channel receiver
HiTec high torque throttle servo
HiTec dual ball bearing steering servo
TORQ .21 3.5cc Nitro Engine
Hi Volume air filter
Slide valve carburetor
Recoil starter (pull start)
EFRA-legal tuned pipe
3-Shoe racing clutch
Front, Center, and Rear planetary gear diffs
Hardened steel ring and pinion
125cc fuel tank
Complete set of 18 Ball Bearings
Sealed radio box to keep out debris
Dual disk brakes with adjustable front/rear bias
Steel tie-rods and camber rods
everything is completely stock from the factory except for the air filter....no adjustments have been made to the car to alter anything
it was always ran at 230-240 degrees and always ran blue thunder 20% fuel in it
this buggy has less than TEN TANKS RAN THROUGH IT
i'll take $200 ... payed $375 ... my loss
you'll need fuel/igniter/12 aa batteries
SPECIFICATIONS
Length: 17.7 in (450 mm)
Width: 12 in (305 mm)
Height: 7.9 in (200 mm)
Front/Rear Track: 10.3 in (260 mm)
Wheelbase: 12.8 in (325 mm)
Ground Clearance: 1 in (24 mm)
Weight: 7.3 lb (3240 g)
HiTec AM 2-Channel Pistol-Grip controller
HiTec AM 2-Channel receiver
HiTec high torque throttle servo
HiTec dual ball bearing steering servo
TORQ .21 3.5cc Nitro Engine
Hi Volume air filter
Slide valve carburetor
Recoil starter (pull start)
EFRA-legal tuned pipe
3-Shoe racing clutch
Front, Center, and Rear planetary gear diffs
Hardened steel ring and pinion
125cc fuel tank
Complete set of 18 Ball Bearings
Sealed radio box to keep out debris
Dual disk brakes with adjustable front/rear bias
Steel tie-rods and camber rods