February Quad Of The Month Entry Poll

[TheFontMaster]

NO MORE ENTRIES THE POLL HAS BEEN MADE




Alright, it's time to start Febuary's Quad of the Month contest. It is starting earlyer than I did for January's contest, so that the winner for febuary can be declaired by Febuary. There are some new rules and some that have been moddified.

First thing is that as you can see Quad of the month now has it's own section. I would like to thank Harlen once again for creating this section, and giving me the chance to run it. I would also like to thank Blingstar for sponsoring the Quad of the Month.

The big change in the rules for this month is that ANYONE can enter and any and all quads are accepted. There is also no limit on how many people can enter the contest. But for the poll the number of contestants will be narrowed down to 10. The quads that get into the poll will be chosen on a combination of looks, and what mods are done to it, but mainly looks.

To enter the contest pics of the quad must be posted by 5:00 Monday the 24th. After that the final 10 quads will be picked out and a poll will be created. Also a list of ALL mods should be writen with the pics.

On a side note, I just want to remind the people in the Quad Builder of the Year not to post thier quad that they have entered in the build off.

If there are any questions, feel free to ask I will make another thread for people to talk about the entries. I would like this thread to be CONTESTANTS ONLY.

[Pappy]

well im entering this one:p


2004 TRX450R

Chassis fully gusseted and powdercoated
Subframe chromed
Spindles chromed
All bracketry chromed or powdercoated
Chrome Burgard +1 stem
Chrome TAG cr hi bars
Spider Grips
Chrome LSR axle
Polished shifter, brake lever and kick start lever
All bushings and pivot bolt molycoated
Hubs, Calipers and swing arm powdercoated
Burgard billet carrier
WER dampner powdercoated to match the color scheme
Burgard polished beadlocks with turfs and radials
Streamline brake lines
Black Laker Custom plastic
Hot Cams stage 2 cam
Curtis Sparks exhaust
Elka Suspension
Burgard Chrome +2 A Arms
Chrome Duncan bumper
Polished AC rear grab bar
Rekluse Z Start clutch
RTC levers

[Pappy]

.

[Tommy 17]

2000 400ex

Elka Long travel compression adjustable quad rate shocks
Burgard +1 long travel a-arms (not in the pic)
Elka Rebuild rear
LSR +3.5 axle
Burgard bearing carrier
BK performance pc frame and gussett
one graphics and seat
Je 10.8:1 piston 406 bore
TC Mx grind cam
Full race porting
Stock Carb Mod
White Brothers clutches
K&n filter
Tinner Scoops
Renthal Bars
Did Chain
Talon Sprokets
Kenda Klaw 20x11x9 rears on .190 douglas
Razr fronts 21x7x10 fronts on .190 douglas
Titan Turf Tamers 18x11x8 on champion beadlocks
Fastline SS red brakelines
Ac Bumper
Ac Nerfs
Ac Full skids
Pro Design kill switch
Braking Brake Pads
Maire frame guards
baldwin case saver

there mayb more but thats all i can think of right now

[Tommy 17]

another picture

[RedRacer44]

My 2004 Honda TRX 450R:

Chassis/Suspension/Etc
Fully Gusseted/Powdercoated Frame
AC Racing Bumper
JH Racing Steering Dampener
Burgard +1 Anti-Vibe Steering Stem
PRP Racing +2 +1 A-Arms
Elka SSD Triple Rate Front Suspension
Advantage Standard Nerf Bars
Roll Design Foot Pegs
Renthal CR-LO HandleBars
Maier Handguards
Works Connection Clutch Lever w/ hot start
Pro Design Kill Switch
Pro Design Case Saver
QuadTech Scoop II Hood
QuadTech Seat Cover
N-Style Ultra Honda Graphics Kit
JH Racing Revalved Rear Shock
GT Thunder MX Linkage
LoneStar Axle
LoneStar Anti-Fade lock-nut

Motor:
Curtis Sparks Exhaust
JE 13:1 Piston
Stage II HotCam
Dyno Jet Kit
K&N Filter w/ Outerwear

Wheels/Tires:
Douglas Red Label fronts w/ Holeshot MXs
Douglas Ultimate Rear Beadlocks w/ Holeshot MXRs

[RedRacer44]

Another Pic

[RedRacer44]

LAST PIC

no fair pappy:p . i guess ill enter mine.

http://img.photobucket.com/albums/v312/kwiatkowski/quadphotos041.jpg

http://img.photobucket.com/albums/v312/kwiatkowski/quadphotos040.jpg

[Johnny & Monica]

Hopefully be back together by feb. getting close missing motor parts still but here is whats there so far post complete by next weekend I HOPE:(

[JDiablo]

mine
2000 400ex
Stock gussteed frame pc'd trans red along with subframe
Houser +3 Lt arms
Elka quad rate fronts
Houser + 1 1/4 swinger
Elka dual rate rear
RPM axle
LSR anti-fade locknut and brake hub
Renthal chain,and sprockets
Burgard rims all around
Kenda klaws up front
Turfs in the rear
Duncan Racing bumper
Burgard stem
Streamline brakelines all around
Quadtech airscoops
Fullbore plastics
Hardkor front hubs
Roll design pegs,shifter,brake pedal
Carbon fiber frame guards
UM oil tank
UM airbox
K&N filter
HMF full system
Fasst Bars
Powermadd hand guards
Magura hydo clutch
Burgard bearing carrier
Motor:
Hotcam stage two
Ported and polished head
lightened freewheel

[diangelo#67]

http://www.z400central.com/qotm/november/2.jpg
walsh:
+3 a-arms
+1swing-arm
+1steering stem
stem clamp
anti-vibe bar clamp
baldwin:
400ex to 250r caliper adapters
twin row 250r bearing carrier
250r anti fade
250r rear caliper bracket
sudco 39mm fcr carb
P.E.P:
dual rate zps arc LT front shocks
dual rate zps arc LT rear shock
96mm je coated piston
stroke
hot cams
drz fmf exhaust
ported and polished head
IMS radiator<not pictured>
mad designs quick change clutch cover<not pictured>
hinson basket
pro taper cr- hi bend bars
braking rotors x3
steel braided brake lines
terry cable 1/2 throtle(half is wide open)
new plastic <not pictured>
new mad designs graphics<not pictured>
kill cord also

[TheFontMaster]

300exrida no pics?

[Paul400ex2002]

Here's mine

Walsh Gusset Kit
Powdercoated Frame and Subframe
AC Racing Chassis Skid Plate
Lonestar +1+1 Steering Stem w/ anti-vibe clamp
Lonestar +2 DC-4 A-arms
Lonestar Round Housing Swingarm
Lonestar 2+2 Axle
Lonestar Honda Pattern Sprocket Hub
Lonstar Billet Rotor Hub
Lonestar Billet Locknut
Lonestar Steel Braided Brake Lines
Lonestar Honda Pattern Front Hubs
Lonestar Honda Pattern Rear Hubs
Lonestar High Mis-Alignment Tie-rod kit
JT racing 38T Sprocket
UPP Rear Chain Slider
Douglas Rolled Lip Front Rims
SS/OMF Wheels Rear Beadlocks
Kenda Klaw MXF Front Tires
Kenda Klaw MXR Rear Tires
ITP SandStars for the Dunes
PEP Long Travel Big Rezzie Front Shocks
PEP Big Rezzie Rear Shock
PEP Steering Stabilizer
PEP EZ Pull Clutch Arm
Honda Front Brake Master Cylinder
DFR Parking Brake Block Off
Fasst Co. Flexx Bars
Renthal Medium Grips
Cam Mod
DMC Alien Full Exhaust
Zip-ty Fuel Screw
DFR Billet Decompression Plug
Pro Design Pro-Flow intake w/ K&N filters
Laker Custom Plastics
DFR Custom Number Plates
Kickstart Kit
DFR Wiring Harness
Advantage Performance Nerf Bars
Advantage Performance Bumper
Advantage Performance Grab Bar
Pro Design Shifter
Tore Up Industries Footpegs
ASV Inventions Blue Clutch and Brake Levers.



http://sponsorhouse.com/images/profiles/73404.JPG
http://sponsorhouse.com/images/profiles/73405.jpg http://www.imagestation.com/picture/sraid141/pec011a85d1a02e6d118298fdb90cabce/f6c692f3.jpg http://www.imagestation.com/picture/sraid141/pbfbf6ae008abaf4ce3d0152390b5bd85/f6c692f8.jpg http://www.imagestation.com/picture/sraid141/p09445d5497fc2210a6acd1f6f3431eba/f6c692ff.jpg http://www.imagestation.com/picture/sraid141/p0a330f952b4b3183c3842b059a5979a3/f6c69305.jpg http://www.imagestation.com/picture/sraid141/p73e514e2801cb8309262c479436f66bb/f6c69310.jpg http://www.ridingarizona.com/forum/uploaded/Nick_03/20041013184337_dunes%2010-10-04%20048.jpg

[chris450R]

well i guess i wil post up my 450R. not the badest one around but it is getting there. all my mods are in my sig. i am working on getting a lsr +3 axle, burgard 8" beadlocks, and burgard +2 a-arms.

http://www.imagestation.com/picture/sraid154/pb5065f9f9d979188e87336c71eb02a8f/f582d963.jpg
http://www.imagestation.com/picture/sraid154/pa9fd3b81abdb2faadc992f9d8ee9b9ab/f57ad9ed.jpg
http://www.imagestation.com/picture/sraid154/p9c9072d84c064dcd3e0ca50831405a63/f57ad9eb.jpg

[BrandonBlackmon]

I still haven't got my seat cover, handlebars, or chrome gas tank cover on but, here it is......

[BrandonBlackmon]

here's another...

[JDiablo]

oopps forgot to add the pix yesterday lol

[JDiablo]

:)

[R3Concepts]

Ill give this a whirl, chock another bike up for the AZ boys, big thanks to Rudy for all this.

Sparks 13.8:1
Sparks aggresive drop in cam
Sparks X6 stainless
400ex K&N filter
HRC needle and jet kit

LSR dc4s trans blue
LSR +1 swinger trans blue
LSR axle
LSR dual feed front lines, single rear
LSR brake line clamps (2sets)
DFR block off plate
LSR stock height stem
PEP ZPS 20 click fronts
PEP ZPS 20 click dual rate rear w/ rezzie bracket
PEP upper roller
AC nerfs
AC front bumper PC black
PD kill switch
Renthal Fatbars
Quadtech flat hood
Ez pull clutch lever
DID 520 ert chain
13,14,38,39 sprockets
Douglas ultimate fronts 4+1 PC black w/ razr mx
Champion beads with inner rings PC black w/ turf tamers
Doulgas .190 fronts PC black w/ shark fins
Skat Trak 8 paddle haulers

[predatorkick@$$]

What the hell just as well try!! http://www.predatorowners.com/memberphotos/predator/502/Image023.jpg
http://www.predatorowners.com/memberphotos/predator/502/Image024.jpg
http://www.predatorowners.com/memberphotos/predator/502/Image002.jpg

[Martin Blair]

well hell with pappy and RedRacer in their no chance but hell ill try it.

BTW thanks for letting me use the color shceme Chance.

[Martin Blair]

another

[Martin Blair]

So far its got:
Yoshi TRS full system
UNI Filter
PRM rear skid
AC Racing bumper
Longhorn Bars
Tusk Risers
SRP steering dampner
Maier Black handgaurds
Pro Designs Kill
Gas tub vent
HRC airbox lid
Renthal sprockets
Black PC frame
Red Swinger and A-arms
Front Kenda klaws on douglas .190
Rear Kenda knarlys on doublas .190
I just order Ac nerfs and the belly skid yesturday along with some shcoks from elka, I plan on getting a stage 2 cam as well.

[shaff107]

Well ... i think that i should have good chance at this. First off i would like to think Roy from Rissler's Extreme ATV. With out all of his help this would not be possible.

[shaff107]

The mods on this bike are as follows

Houser +1 1/4 Swingarm
Houser Long Travel Linkage
Houser +1/2 Long Travel A-Arms
Houser +1 Steering Stem
Houser 5/8 Airbox Riser
Custom Axis 19.5" Long Travel Fully Adj. Front Shocks
Custom Axis 17.5" Long Travel Comp Adj only Rear Shock
GPR Steering Stabilizer ( not yet installed )
Duncan Racing Full Exhaust
Fasst Co. Flexx Bars
Hi - Per Carbon Fiber Beadlocks ( full set )
ITP H-D Tires ( full set )
Maier Neon Yellow Plastics ( full set )
Quad Tech Scoop 2 Hood
PRM Summit Front Bumper
PRM baja Grab Bar
PRM .250 Swingarm Skid Plate ( not yet installed )
PRM .125 Belly Skid Plate
Spider Grips
Power Madd Handgaurds
Power Madd Wrap - arounds ( upside Down for a reason lol )
HRC Kit
UNI Airfilter
Black PC'ed Frame ( THANKS TO PANDA PC'ing )
Up Dog # Plates
Pro Design Kill Switch
LSR Praking Block Off
IMS/Roll Design Pegs
AC Nerfs ( Not yet installed )
One Industries Gripper Seat Cover
Stock 450R Fender Graphics w/ Rissler's Extreme ATV tank graphic
Stainless Steal Rear Mastercylinder Gaurd
Moose E - Z pull Clutch Lever
Moose E - Z pull Clutch Perch
CR250R Clutch Cable Dust Gaurd
N - Style #'s

[shaff107]

Front View ...

[shaff107]

Side View ...

[shiftmx218]

before
http://www.imagestation.com/picture/sraid79/p476245a1bd04e2c4acb3667a3a2e1491/fb1b7c6f.jpg

now
http://www.imagestation.com/picture/sraid155/pd13f2850a18953a7533c095da58697d8/f56ac3c0.jpg
http://www.imagestation.com/picture/sraid155/p60fbddc5aee9a361c8fecae79058ab8f/f56ac391.jpg

[Gabriel Racing]

here we go

[Gabriel Racing]

another one

[Gabriel Racing]

a picture of my brother racing his 450r at jolly roger in New Hampshire

[Gabriel Racing]

now for my quad


2001 full walsh 250r frame with a blaster motor inside.



Mods ---> 01 Full Walsh 250r Frame ( Frame, Sub Frame, Swingarm, Steering Stem, A-Arms, and radiator), Full Bore 250r Plastic, Mike Walshes Old Graphic Kit, Clarke 250r Gas Tank, Tag2 Handle Bars, Pro Design Kill Switch, Tag Grips, Hipers All Around, Ipt Back Tires, Kenda Claw Front Tires, Elka QuadRate Front Shocks, Rear Elka QuadRate CR500 Link Custom Shock, X-Factor Propegs Nerfs, Front Bumper And Rear Grab Bar, Rpm Axle, Lock Nut, And Bearing Carrier, QuadTech Seat Cover,

Blaster Motor All Done Up Stuffed Inside ( Ported N Polished, V- Force Reeds, Carb ).
Dyno Port Custom HeadPipe/Silencer.

Motor That Came With Bike -
Duncan PC2000 265 Nikasil Powervalve, with Duncan Pipe, silencer and carb



http://www.imagestation.com/picture/sraid120/p0c313b7a558b2758464e92e97bf8fd10/f8672e28.jpg

http://www.imagestation.com/picture/sraid120/p029b31f8f9efb682dadab9e83c1bd396/f8672e29.jpg

http://www.imagestation.com/picture/sraid120/pb1fe5e3d50a6163a370309c0bcae866f/f8672e2d.jpg

http://www.imagestation.com/picture/sraid120/p7d253df361ae1cacc35b3efbb1b74a76/f8672e30.jpg

http://www.imagestation.com/picture/sraid120/pfa2aa614dab9c8e98db5d7726677ace4/f8672e32.jpg

http://www.imagestation.com/picture/sraid120/p07a0551cf67ba49259c15d13a14df258/f8672e35.jpg

http://www.imagestation.com/picture/sraid120/p1c2c3f1f5aaa87a7abb8869d3df2fb41/f8672e37.jpg

[beerock]

heres my entry:devil:

[beerock]

Laeger stock geom frame powdercoated super mirror red and clear silver flake
Laeger FLIP TOP Show Chrome subframe
Laeger Pro Trax front end Show Chrome
Axis dual adj triple rate long travel shocks
Herman polished bilit resiviors powdercoated with red flake clear coat
Hardkor front cdale hubs
Gafler front wave rotors
Laeger -1 3/4" 250r link swingarm
Axis rear dual adj
Gafler rear wave rotor
Lsr antifade hub
Rpm dominator +4 axle
Hi-per rims
Renthal fat bars
Rtc clutch lever
400ex brake resivior and lever
Ricky stator billit lights
Ricky stator 200 watt stator /light flywheel
Oem Honda plastics
Clark 4gal tank
BWR graphic kit and number decals
Custom hood and shrouds by feather carbon
new cases, crank, tranny, 330 top end
ESR bilit Polished kick starter, motor mounts and shift lever powdercoated with a red flake clear
Hinson rear brake pedal
Custom atv innovations seat cover
Curtis sparks chrome pipe/silencer TT and MX
Afco oversized radiator
Custom BWR quick change clutch cover cover
powdercoated super mirror black with red flake clear, quick change piece engraved, etched and polished, then powdercoated with a clear red flake.
allen head stainless bolts
Ac bumpers nerfs grab bar
Hardkor billit brake resivior covers and throttle.
Gafler brake stainless kevlar brake lines

[beerock]

custom quick change cover ;) with logo etched and polished

[beerock]

its hard to see the flakes unless the sunlight hits it but its trick!

[beerock]

you can see the suttle redflakes in this pic :cool:

[JDiablo]

you have any better pix of the subframe?i want to see exactly how it is designed,thanks

[TheFontMaster]

I am startin the Poll now. The thread is closed for entries.

[beerock]

Originally posted by 300exrida
you have any better pix of the subframe?i want to see exactly how it is designed,thanks

but of course!

[beerock]

heres a close up

[TheFontMaster]

Once again entry for this months QOTM has stoped.

[the Z Man]

Powder coating by Chance's Powder Coating
Lakers custom Plastic, Irazors, Denton stabilizer, AC nerfs and bumper, One Industries graphics, Trial Tech X bars, Acerbis hand guards, Baja T9 rims, TCS ZPS shock conversion by C&D Racing, GT Thunder full race exhaust, Galfer wave rotors, Hotcam, Uni filter, Quad Tech carbon fiber shock covers yet to be installed.

[the Z Man]

Sorry about the night shots

[TheFontMaster]

NO MORE ENTRIES TRY NEXT MONTH!!!

[JDiablo]

Originally posted by beerock
but of course!

I dig that,you have a close up of the locking mecanismn(sp) so it doesnt flip up when your riding?thanks

[TheFontMaster]

I think someone is getting an idea

[JDiablo]

Originally posted by TheFontMaster
I think someone is getting an idea

:devil: ;)

[beerock]

Originally posted by 300exrida
I dig that,you have a close up of the locking mecanismn(sp) so it doesnt flip up when your riding?thanks

its in the last pic i showed, its the oem rubber gromet for the rear posts

[jwick07]

At first I didn't like the all black 450R but yours changed my mind. It looks great. Great work man.

jwick07

[QuadJunkies]

when is the next month post for pic entries?? :)

[jwick07]

I dont know man I new at this too sorry.

[jwick07]

I need sombody in salina to go riding with

[shiftmx218]

i live in topeka and theres lots of people here taht ride

[TheFontMaster]

Originally posted by QuadJunkies
when is the next month post for pic entries?? :)

I dont know the exact date I'm gonna open it, I haven't looked at a calender, but every month it will start 2 weeks before the next month. So that would be 2 weeks before the begining of march.

[TRXDresh]

All I have to say is that yellow 450r is bad to the bone. I think Honda should add Yellow to the color scheme next year!