My 400ex

[JDiablo]

well since i dropped out of the buildoff due to complications and i know i wont finish,im particpating in the product review section and helpful tips,and just wanted to show some pix of the 4??.

This is when i first got it

[JDiablo]

This is after about 3 months

[JDiablo]

2.

[Honda4trax250x]

oh man from the looks of it you were doing an awesome job, its a shame you couldnt stay in

[JDiablo]

This is the most recent one all i need now is a couple more parts to be installed and a massive amount of cleaning and polishing yet

[JDiablo]

PARTS
+3 Houser LT arms
Elka quad rate front shocks
Duncan front bumper
Burgard beads all around
Houser + 1 1/4 swinger
Elka dual rate rear
Rpm axle
HMF full exhaust
UM airbox
UM oil tank
Massive amounts of PC by pappy
Stock gusseted frame
Fullbore plastics
Quadtech airscoops
Burgard stem
Fasst bars
Streamline brakelines all around
Roll design pegs,shifter,brake pedal
K&N filter
LSR antifade locknut
Burgard bearing carrier
hardkor front hubs
And there are still other lil things that i forgot

looks really good man
:eek2:

[JDiablo]

Thank you all for your compliments,but i would like to thank Pappy for the pc bling and C&D for hooking me up with all my parts....mad props go to them:devil:

[JDiablo]

Thank you all for your compliments,but i would like to thank Pappy for the pc bling and C&D for hooking me up with all my parts....mad props go to them:devil:

[I-7]

Looks great man :cool: . Its a shame that you couldn't stay in the buildoff though :(

[JDiablo]

yea im sure there are going to be plenty better then mine out there neway

[ny300exrider]

wow i was looking forward to seeing this for awhile, thought i was going to have to wait till the buildoff. well all i can say is it is more than i expected, looks SICK man

[Pappy]

looks real good so far.

you can be proud you did the work and thats what counts:cool:

[JDiablo]

yea i am proud,my parents said that it is time to build me a garage just for my quads so i was like yea no doubt...so im stoked for that,but still Ken i can't thank you enough:)

[Sportrax10]

Wow... :eek2:

It look amazing so far!

I cant wait to see the finished pics.. :macho

Too bad you couldnt be in the buildoff... :(

sweet man thats some sweet ground clearance:eek2:

[Butters]

i like it alot. the only thing i would have done differantly is put some kenda klaws on the back but still looks great.

[roostin_dale]

Looks good;) allthough you showed me the pics a long time ago:devil: on AIM..

[Punk'd]

Wow thats lookin great and is going to look even better when your done! Keep up the good work!

[Moto92]

wow that thing is lookin sweet

[JDiablo]

Originally posted by roostin_dale
Looks good;) allthough you showed me the pics a long time ago:devil: on AIM..

stop hacking into my computer :o

[Ex_Rider43]

def. one of the best 400 ever I couldnt wait to see your your 400 and now... wow it look great with the red fullbores!!


you should get some pics with a better camera that would be great!

[Silverfox@C&DRacing]

looking good woot woo, I didn't realize you weren't in the buildoff anymore :( btw you should see a pkg tomorrow or friday..

[Rico]

Definitly pissed off

[MY450R]

wow very nice job man
trade me for the 450 will ya? j-p
me likey likey

[JDiablo]

Originally posted by MY450R
wow very nice job man
trade me for the 450 will ya? j-p
me likey likey

ill trade:devil:
OK dusty ill be looking for it,now i just need to get it all cleaned up and get it ready for pix

[ZSK]

Have any new pictures yet?

[JDiablo]

just this one,just let me know if you wnat some more ill go take a couple

[Gabriel Racing]

nice job!


take some action pictures.

[roostin_dale]

Originally posted by Gabriel Racing
nice job!


take some action pictures.

ha he cant even ride

[JDiablo]

Originally posted by roostin_dale
ha he cant even ride


haha very funny smartass,i will once i ride again,havent been up to the lake riding in a bit:o

[roostin_dale]

Originally posted by 300exrida
haha very funny smartass,i will once i ride again,havent been up to the lake riding in a bit:o

:D haha, im kiddin buddy...

[JDiablo]

Originally posted by roostin_dale
:D haha, im kiddin buddy...

i know im just telling you..............i think i have my magura hydro clutch coming in today if not tomorrow then

[steveatv3]

Hats off to ya john!

Very very nice job, very impressed the sad thing is with all the 450s comming out its going to be hard to fine people that want a 4??ex. Let me know when u part it out, ill be sure to snag some stuff off of you. Seriously though it looks incredable! I dont know if u did already but polish the crap out of the cooling fins on the motor and side cases :) . I think you should still be able to get somthing for ur hard work!

lol and just imagin this is how i dropped it off on your stoop:

http://www.imagestation.com/picture/sraid155/p3825cd8eabfdc7fcea248c565225c455/f565e870.jpg http://www.imagestation.com/picture/sraid155/pef80d4d1970f4790c847774e30c332ac/f565e86b.jpg

This is it when i owned it:

http://www.imagestation.com/picture/sraid155/p84eb263aa32a7b18236e4d26ca90c635/f565e865.jpg http://www.imagestation.com/picture/sraid155/p901c5b03027ae20eac2f1c8b7ff2946c/f565e85e.jpg

[JDiablo]

lol thanks steve,i know it sux with the 450's but imma part it out,there are still alot of people out there that own 400's so i guess thats a good thing

[JDiablo]

well imma go outside and take some more pix,imma setup the tripod thing so the pix can be as clear as possible

[exrider360]

you were one of the few i was waiting for i was just thinking about the buildoff. you would of had a great chance of winning



i didnt look through all the posts for a mods list but if you posted it already tell me if not lets see it

[JDiablo]

heres a couple

[JDiablo]

2.

[JDiablo]

3 man i gotta get a digital camera this camcorder sux at taking pix even with the stupid tripod

[JDiablo]

4.

[JDiablo]

PARTS
+3 Houser LT arms
Elka quad rate front shocks
Duncan front bumper
Burgard beads all around
Houser + 1 1/4 swinger
Elka dual rate rear
Rpm axle
HMF full exhaust
UM airbox
UM oil tank
Massive amounts of PC by pappy
Stock gusseted frame
Fullbore plastics
Quadtech airscoops
Burgard stem
Fasst bars
Streamline brakelines all around
Roll design pegs,shifter,brake pedal
K&N filter
LSR antifade locknut
Burgard bearing carrier
hardkor front hubs
some motor goodies and a couple of lil small things that i forgot,and hopefully ill get my magura hydro clutch today and install that too

[steveatv3]

awsome, what were u waiting for that u quite the build off??

[JDiablo]

hinson quick change clutch cover,chroming,a whole lot of polishing to do,all lil accesary parts...it is 100% rideable
I just have to finish all the fine lil details,like killswitch isnt hooked up,electrical wires are all wacky,needs to be cleaned,everything needs to go over again and make sure nothing is loose,and now i have absoultey no time,i cant even get time to get my seat cover put on put it that way,lol

[K_Fulk]

Sweet quad. :macho

[LsMxRaCeR]

why didnt none of the pics have back plastic?

[YFZ450Ridr]

looks freakin awesome, incredible work.

and are those KFX400 shocks on the front in the very first pic?

[416exmx]

excellent job!!!

good choice of parts also.... Now go ride that thing.

I dont know what you have done to the motor, but a 39mm FCR carb will really bring it to life if you dont have one yet.

[QuAdEr 317]

prolly far from now but when you decide to part that out i will be very interested in the arms n shocks n swinger lol far from now but im jus lettin ya kno haha i love this 400

[JDiablo]

Originally posted by 416exmx
excellent job!!!

good choice of parts also.... Now go ride that thing.

I dont know what you have done to the motor, but a 39mm FCR carb will really bring it to life if you dont have one yet.

thank you

and i dont have any back plastic on because i dont have my seat cover on and i have barely any time for it,and yes im planning on getting the FCR or edelbrock soon

[JDiablo]

Originally posted by 250EXridr
looks freakin awesome, incredible work.

and are those KFX400 shocks on the front in the very first pic?

Thank you too and yes those are KFX 400 shocks

[hondarider2006]

Looks good bro:D :cool:

[QuAdEr 317]

Originally posted by 300exrida
PARTS
+3 Houser LT arms
Elka quad rate front shocks
Duncan front bumper
Burgard beads all around
Houser + 1 1/4 swinger
Elka dual rate rear
Rpm axle
HMF full exhaust
UM airbox
UM oil tank
Massive amounts of PC by pappy
Stock gusseted frame
Fullbore plastics
Quadtech airscoops
Burgard stem
Fasst bars
Streamline brakelines all around
Roll design pegs,shifter,brake pedal
K&N filter
LSR antifade locknut
Burgard bearing carrier
hardkor front hubs
some motor goodies and a couple of lil small things that i forgot,and hopefully ill get my magura hydro clutch today and install that too

lol wen he parts out after summer i call first dibs on many many parts

[416exmx]

Originally posted by QuAdEr 317
lol wen he parts out after summer i call first dibs on many many parts

when you post prices 300exrida, he will say "can you go n e lower on on prices"....lol

[JDiablo]

Originally posted by 416exmx
when you post prices 300exrida, he will say "can you go n e lower on on prices"....lol

lol im expecting that from alot of people

[rollie]

hey john nice job man.....:)

[Dave400ex]

Dang I want a HMF pipe just like that...

[JDiablo]

Thanks everyone,now im a lil diasspointed in her....she doesnt want to spark,so idk what the problem is

[QuAdEr 317]

Originally posted by 416exmx
when you post prices 300exrida, he will say "can you go n e lower on on prices"....lol
man ur so funny
u wouldnt try to get the best price u can?:eek2:

[ZSK]

Originally posted by 300exrida
Thanks everyone,now im a lil diasspointed in her....she doesnt want to spark,so idk what the problem is

Make sure the frame and subframe are making a proper connection. You'll probably have to grind some of the PC away so that they can make the connection.

[JDiablo]

Originally posted by ZSK
Make sure the frame and subframe are making a proper connection. You'll probably have to grind some of the PC away so that they can make the connection.


i did all of that already i basically got it all down tho