FMF PowerBomb Header

[youngdawg]

I have an 03 400EX with a White Bros. R4 silencer and was wondering if the FMF PowerBomb header will fit it with no mods or leak problems. Any info appreciated...

[Rico]

It will fit fo sho....:cool:

any slipon that fits the stock header will fit a powerbong...;)

[400-416EX]

hehehe......He said powerbong......hehehe

[397ccEX]

Yo guys is verry funny
Is the Power bo MB a good header

[400-416EX]

yeah its not bad, wont be dissapointed with the purchase

[jaspurx]

I heard about the powerbong................... where`s the party?


Well somebody hadda say it!


I have been thinking about getting the powerbomb header too.

[meangreen400ex]

I love my powerbong. peace out willie nelson

[Rico]

I"ve been running one for about 4 years now and have no compaints.

You WILL have to up your pilot jet if you put one on....:cool:

[youngdawg]

I appreciate all the help. The bike has a 440 big bore 11:5 to1 piston, stage 1 Web cam, and a Big Gun rev box.Motr was done at a performance shop. I live just off of the coast of Pismo California. How much of a jump will I need on the jets?

[tryken]

Rico, have you had the same header for 4 years? Just wondering how it is holding up. I know that you race xc and all.

[Rico]

Originally posted by tryken
Rico, have you had the same header for 4 years? Just wondering how it is holding up. I know that you race xc and all.

Yes it's the same one. It did crack by the bomb part due to a major rearending at a GNCC race and to be welded. It tore my muffler off from the impact and jacked up the header. It has held up great, and having it ceramic coated made it even better.

[throwinitup]

is it possible to re-coat a big gun header?

[meangreen400ex]

Ya mine broke right by the bomb too...had it rewelded and has held up fine.....I'm thinkin bought getting it ceramica coated ....hows that hold up to dirt...

[Rico]

Originally posted by meangreen400ex
Ya mine broke right by the bomb too...had it rewelded and has held up fine.....I'm thinkin bought getting it ceramica coated ....hows that hold up to dirt...

HOlds up great to dirt. It cleas up sooooo much easier with the coating on it compared to a stock pipe. It looks good, reduces, heat and cleans easier,, nothing but good things...:cool:

[meangreen400ex]

I usually don't have a problem with dirt do to a 2500 psi power washer

[hardbodyt]

WHo does it? Recommend anyone?

[Rico]

Originally posted by hardbodyt
WHo does it? Recommend anyone?

I had mine done at HPcoatings.com but I think Pappy is doing it now, so I'd hit him up first...:cool:

[400EXdude]

would the powerbomb fit onto a White Brothers E-series slip on without any problems..?...its for a 400ex by the way..

[JOEX]

Originally posted by 400EXdude
would the powerbomb fit onto a White Brothers E-series slip on without any problems..?...its for a 400ex by the way..
Yep.;)

[tdsongster]

Wouldn't ceramic coating make it run hotter by keeping the heat in? Also, do you recommend a powerbomb and slip-on versus a full exhaust?

[boricua]

ceramic coating as it was explained to me, does keep the heat inside the pipe. which allows it to flow at a higher rate since hot air is thinner and moves faster, also...the surface temperature is cooler...still too hot to touch, but it might be easier on you or your gear. i think it was designed to be used in close proximity with heat sensitive equipment...and it looks good too..

[throwinitup]

yeah the big gun comes ceramic coated...but i need to get mine re-done...can you send it back to big gun to get it done?