CR500 linkage question

[Fred]

How long is the shock you use for cr500 linkage

[tholt]

The shock is aroud 18 or 18 and half inches. Most no-link setups are the same length except some of the no-link setups that pep does is only 17 inches.

[Fred]

Thanks what is the year off cr 500 linkage that laeger uses?
and do i have to modify the lowe frame mount ?

[QuadRacer041]

you cant use a cr500 link on a stock chassis you can only use it on a frame made for it

[beak7707]

yep, you have to have a frame and swinger set up for no-link.

[zedicus00]

he meens frame an swinger setup for cr500 link. i dont think its worth the hassle of converting a stock frame though. either get an aftermarket frame or if u wanna keep the stock frame u can get a no link swinger from roll design an possibly other to use a no link setup with stock frame. even most no link setups require the shock mount on the frame to be moved though.

[Fred]

yeah I am building my own swing arm and debating on which to go with a cr500 link or a no link rear end almost a copy of a jrd that uses a stock 250r shock mount.
I would rather the cr 500 link but laeger frames are no longer availble an out off my budget anyways.

[blasterkid]

i use jrds swing arm and have a stock frame we were gona roll the shock mount but it wouldnt have worked to well not enough room so we jsut shortened the shock a little and valved it right its awsome now joes an awsome guy to work with

[Fred]

cool any pics off your 250r rear end