Lets see those 250r's

[FlushClinker]

In the June issue of Dirtwheels they have the original shootout article from 1986 which reviewed the 86' R and then the shootout between the LT250 and 250R

[Prey]

thats my bro's lt250R.

a few months ago they did the original LT250R test re-print, he was pretty excited about that, then i bought the new issue and saw the original TRX250R test and 1st shootout, it was pretty cool, i remember reading that shootout in the original issue way back when........

[Prey]

toyota, the lt250 does real good in general (as fast as a piped shee) but its not fair to compare against my R (310 motor and after market , suspension, a-arms and swinger), he is all stock except pipe/carb

my brother is thinking about selling it, if he does, i will most likely buy it.

[NEPA250R]

Does the LT feel a lot lighter than the R? I read in Dirtwheels that the LT only weighed 298 lbs., compared to 328 lbs. for the R.

[Prey]

i think my bro is becoming a member of this site....so he can confirm that his lt feels a fair amount more heavy than my R, again, im not sure what kinda weight reduction all the after market parts make if any

enough so that i am thinking about buying a scale to put the jackstand and the quads to measure

[KajunATVer]

Here's mine...

[KajunATVer]

another...

[KajunATVer]

At LA Dunes...

[KajunATVer]

1999 250R??? ;)

[FlushClinker]

nice duner man... that pipe looks sick...

[speedjunkie250]

HEY KJUN MAYBE WE WILL MEET AT THE DUNES.MY R WILL BE FINISHED IN A COUPLE OF WEEKS.

[speedjunkie250]

HEY KJUN MAYBE WE WILL MEET AT THE DUNES.MY R WILL BE FINISHED IN A COUPLE OF WEEKS.

[speedjunkie250]

HEY KJUN MAYBE WE WILL MEET AT THE DUNES.MY R WILL BE FINISHED IN A COUPLE OF WEEKS.

[250-R-250]

Where in Louisiana are you I live in Ruston its by monroe

[1fastprototype]

you can check out my 05 250r it is on the front cover of ATV ACTION this month with a 5 page write up

[KajunATVer]

I'm in Greenwell Springs...on the outskirts of Baton Rouge.

[250-R-250]

Sweet....I go to b rouge all the time I have family and land down there we ride on....I am going to build an Mx track when I get the time its a perfect spot gots 40 acres or so and a house on it so one day we should go riding I will pm you if you want in!!!!

[smwood79]

I ride the Oregon dunes...

[KajunATVer]

Hey 250R250, sounds good. Let me know when you're down this way again and maybe we can go riding. As you can see my R isn't an mxer or trail quad but I have a Foreman for trails.

[2StrokeFreak]

Hey Kajun,

Where did you get your seat cover? I want one...

[KajunATVer]

I ordered it from an add in Dirt Wheels back in 1999. It's made by hi-flite. Sorry but I don't remember exactly where I ordered it from. I'm sure you could find one on the net though.

[2StrokeFreak]

Its getting tough to find a decent cover, unless you want a griper.
I'll do a search for hi-flight.
thanks!

[FlushClinker]

razorbackatv.com made my seat cover and they did a really nice job with the flame design.

[250-R-250]

lol there and no trails its just a WIDE open pasture and you could drag or what not...anyways just too let you about it....I will shout at ya when I get there

[speedjunkie250]

MY BIKE ISNT FOR TRAILS EITHER IM BUILDING A DUNER. I ALSO HAVE A FOREMAN 4 WHEEL DRIVE.

[quad9]

my 86 r just restored, its for sale

[HiperEX]

will be mine next weekend:macho

[JTRtrx250r]

Originally posted by HiperEX
will be mine next weekend:macho Shes pretty trick lookin';) :cool:

[HiperEX]

yes she is

[wvspeedfreak]

Mine

[wvspeedfreak]

front

[jgracing]

MX

[bananas]

1986 It done and we are Riding as much as we can...... When you hit 4th Good luck holding on... Now need to Finish the 1987...

[toyota200x]

That bumper looks pokey.

[300ex_ryda]

heres my 85' R .....complete with an old school pipe,and 38mm a/s....

hrc85250r has attached this image:
















r those douglas wheels?

[bananas]

I ride like a bull. You don't want to be in front of me.... :devil:

[dynofox]

My 86 ATC 250r.

[dynofox]

Another

[TheIceMan]

here's my "bomb" before p/c
http://img.photobucket.com/albums/v43/Vinmaster/ttquad.jpg

[TampaBoy813]

Originally posted by TheIceMan
here's my "bomb" before p/c
http://img.photobucket.com/albums/v43/Vinmaster/ttquad.jpg man that looks good with 400ex plastics...how much work was it to do it?

[TheIceMan]

man that looks good with 400ex plastics...how much work was it to do it?
thanks,lol.
actually, it is a Fischer (1999) frame

[speedjunkie250]

Yeah you can buy it at service honda . it uses a honda cr 250r motor . no offence.

[TheIceMan]

Only thing mine has in common with Services' bike is the plastic,seat,tank,no offence.

[TampaBoy813]

post some more of the bike....

[TheIceMan]

Once i get it back together,sure :) it looks pretty sick with a black frame.

[z400clone]

Here's my 89 that is bone stock besides the stock front tires/rims. It's never been redone.

http://www.z400central.com/invision/uploads/post-1878-1119499533.jpg

http://www.z400central.com/invision/uploads/post-1878-1119499581.jpg

http://www.z400central.com/invision/uploads/post-1878-1119499437.jpg

http://www.z400central.com/invision/uploads/post-1878-1119499035.jpg

OK that's enough....

[kwatts400]

That is one sweet r. Get some stock front tires on it and it will be perfect.

http://www.imagestation.com/picture/sraid174/p8e4fdb9e1dc5c6ffcc2722b5af316d70/f39d1905.jpg

Heres my 89r.

[z400clone]

thanks kwatts.

I'm looking for stock 250r/400ex wheels/tires. If anybody has a pair, shoot me a pm. Those itp's and fast trekers just aren't doing it for me.

[kwatts400]

Look for the 450r fronts also. They are a little different but, they may be easier to come by.

[steveatv3]

my old 250R :eek2:

[steveatv3]

2

[2StrokeFreak]

Clone,
Where did you find that 89, do you still have both of your arms and legs?

Freak

[z400clone]

Originally posted by 2StrokeFreak
Clone,
Where did you find that 89, do you still have both of your arms and legs?

Freak

LOL Freak, I did a little trading for it. I've been looking for a sweet 89 and I had a yfz 450 sitting around. The guy wanted my yfz and I wanted his R so it worked out!:D

[2StrokeFreak]

Wow, very nice. what part of the world are you from.

I've been trying to look at an 89 that one of the members here offered up, but wont call me to come see it. :mad:

[z400clone]

Originally posted by 2StrokeFreak
Wow, very nice. what part of the world are you from.

I've been trying to look at an 89 that one of the members here offered up, but wont call me to come see it. :mad:


I'm from the center of america. I'm from the flat lands of Kansas.

It was a pretty sweet deal, I just had a nearly mint yfz sitting around and the guy saw a pic of it. He pmed for a trade. I jumped on it. It would have never happened without a good trading piece. He wanted a nice, fast quad.

[z400clone]

And I still have this for a daily rider......

(at the bottom of the page)
link (http://www.exriders.com/vbb/showthread.php?s=&postid=1677129#post1677129)

[2StrokeFreak]

He must have been out of his mind to give that up for a yfz.
Good trade for you. My 88 is in the same condition as yours.
Go back a few pages on this thread and check out the pics.
I've done some stuff to make it trail worthy, but I do feel some guilt after riding it. If I had a mantle big enough.

[z400clone]

There are a lot of tight R's here. You have a nice 88 Freak. I'm a four stroke guy if you have seen the link I provided. I can build em. But I'm trying to learn two strokes now. I'll probably need some help and advice from you two stroke freaks around here :blah:

[2StrokeFreak]

Aint no thing Clone, just ask. There is alot of good info here, and alot of good people that know their R's that are willing to help. Alot of good info is already here just do a search.

If you can build a thumper, a 2-stroke will be easy for you.

[TRX_250r18]

Originally posted by kwatts400
That is one sweet r. Get some stock front tires on it and it will be perfect.

http://www.imagestation.com/picture/sraid174/p8e4fdb9e1dc5c6ffcc2722b5af316d70/f39d1905.jpg

Heres my 89r.

that doesn't happen to be silverlake????

[kwatts400]

Originally posted by TRX_250r18
that doesn't happen to be silverlake????

Yep!

[genoapb]

Just finished test fitting and running now im gonna paint the frame black and add a K&K red and black flame graphics kit. http://www.planetsand.com/memberphotos/333415-370dragcomplete.JPG

[NEPA250R]

1

[NEPA250R]

2

[HiperEX]

just took this pic of mine the other day

[300ex_ryda]

NEPA250R

that is an amazing quad!!!!

[NEPA250R]

Thanks.

[Dave83]

Mine,Ill update the pic in a week or so with the ESR 310 kit.

[250Renvy]

Originally posted by YFZRob
And here's some new photos of the 3rd 88 from Scott. It's come a long way since I bought it. What's the deal with Scott?? Does he buy and sell mint 88Rs? I had a strange story with mine. I had a signed title from someone else 3 months before I bought it. It was signed over from a woman that put the selling price at $100.00. He had some story about how he sold it to her, but she couldn't pay him so she sold it back, and listed it at $100, so he wouldn't have to pay a lot in taxes. Well, I hope that's a valid story and he didn't just find it at some widows house and offered her $100 for it. He rigged it up with about a gallon of armor-all and did some ghetto clean ups like paiting the stock exhaust, flywheel cover, and front sproket guard. The bike needed new pegs, a complete rebuild of the rear suspension linkage and swing arm pivot, some minor de-rusting of the frame on the bottom, new chain and sprockets, new handlebars, grips, and some other minor stuff. That stuff plus not having the original piston like he said it did, are the only complaints. It's a great quad. Brakes are all in perfect condition and original, so was the chain and rear sprockets, so you could tell it wasn't riding THAT much for being 17 years old.
http://www.looseboltsmotorsports.com/images/250R0008.JPG



HEY YFZ ROB, POWERSLIDER and 2STROKE FREAK!

Which one of you bought the nice 88 Scott had listed in around February of this year? The one on the cylcetrader that said it was stored for 6 years - $4800? I was going to go look at it but wasn't able to make it before he sold it. He had another original for $4K but it seemed a little rough for that price. I managed to get down to look at it and his little treasures - one of you know what I mean. He told me he just picked up an 89 that he is redoing. After talking to him for several hours, I'd have to say this guy is hands down THE 250R guy.

Another question - did you guys get original seats with the 88's or factory replacements new ones?

Nice R's boys.

[FreeStylerEx]

this is my old 87 it had a built basicly new 250r motor all parts from service honda and i jumped it 4 times then it spit tranny threw new cases and etc...local honda shop ripped me off cuz they dnt know how to work on anything anymore...sold it shamly for 2200 blown up

[muddy400EX]

Originally posted by NEPA250R
2


one word...WOW!:eek2: kinda looks like Ballance's old R

[robyone]

just finished this
http://i4.photobucket.com/albums/y142/robyone/DONE1.jpg
http://i4.photobucket.com/albums/y142/robyone/DONE2.jpg

[NEPA250R]

muddy400ex, I actually started building it the last year ballance raced his R. I don't like being a copycat, but I thought his R was one of the nicest I had seen, so I went with that color/graphics combo.

[muddy400EX]

Originally posted by NEPA250R
muddy400ex, I actually started building it the last year ballance raced his R. I don't like being a copycat, but I thought his R was one of the nicest I had seen, so I went with that color/graphics combo.


i agree. i always loved ballance's yellow R, and your looks just as good!

[3-UP]

Heres mine, sorry about the motor guys:eek2: .

[3-UP]

And another pic, nice to be on a sight thats so easy to post a pic:D .

[honda350r]

This one of my 370s

[honda350r]

This is one of my mx 265

[honda350r]

This is my duner 88

[honda350r]

This is my 89 370 duner ,short swingarm made it fun to ride

[honda350r]

This is my non restored 86

[honda350r]

This is my 370 alky hillshooter

[honda350r]

This is a rotax cylinder 250r It was a high maintance POS ,

[honda350r]

engine

[honda350r]

This is another 88 duner w/ a ESR 310 .. Most of my machines have ESR engines ,they have been very good to me .. It is too bad that the 250rs have lost so much value in the last couple of years! I can no longer put that kind of cash in to them and sell them for what they a truely worth.

[honda350r]

This is my alky 370 on the dyno

[honda350r]

One of my 370 painted cylinders,no it did not get hot !

[honda350r]

Then I wanted to go even faster and built a 535 cheetah and the damn thing tried to kill me .. It threw me of at 65 mph and I put the drag quad away! Bummer . That is what I get for switch to the dark side. LOL

[honda350r]

This is what my buddies 535 T-rex did when it tried to kill him. ..

[Cr85rRida]

holy **** you have alot of nice toys! i will post mine once the make over is complete. Still waiting fro my full bores. :macho

[honda350r]

This is a 380 esr full custom I built for a buddy of mine.. This picture does not to it justice

[honda350r]

.

[honda350r]

,

[baker250r]

i smell bull****:rolleyes:

[honda350r]

Originally posted by baker250r
i smell bull****:rolleyes:

Why would you say that ??

This site really has no respect unless it is Bull s h i t !

I share my work with this site and you say I am full of it ..

thanks !

[baker250r]

its all in good humor man.... if u do own that many, thats cool. not tryin to start WW3 here

[honda350r]

Originally posted by baker250r
its all in good humor man.... if u do own that many, thats cool. not tryin to start WW3 here

That is cool then! I just don't get any respect on this site and thought it would be good idea to show off some of my toys that I have built and owned over the past 5 years..

I don't hardley even work on 250rs anymore the four strokes keep me pleanty busy and I really do enjoy working on brand new quads..

[J_bob_28]

dude u have some ****in awesome totally kick *** Rs:eek2: :eek: :eek2:

[dunatic]

Just finished her tonite....ready for the dunes now.

http://www.mpracing.biz/gallery/albums/album102/DSC00421.sized.jpg

http://www.mpracing.biz/gallery/albums/album102/DSC00405.sized.jpg

http://www.mpracing.biz/gallery/albums/album102/DSC00399.sized.jpg


http://www.mpracing.biz/gallery/albums/album102/DSC00425.sized.jpg

http://www.mpracing.biz/gallery/albums/album102/DSC00407.sized.jpg

http://www.mpracing.biz/gallery/albums/album102/DSC00412.sized.jpg

http://www.mpracing.biz/gallery/albums/album102/DSC00415.sized.jpg

[honda350r]

Nice work ! I hope that Polaris works out for you .. Is that a MP ?

[dunatic]

Yep.....i built it 2 years ago for a customer that traded it back in for a 440 rotax.,.....last dyno'd at 63. it's got like 100 hours on it, still has perfect compression started today on the 3rd kick.

[dunatic]

Here was my last bike....had it 10 years

http://www.mpracing.biz/gallery/albums/album19/DSC01550.sized.jpg

[dunatic]

here's one we put together for a customer

http://www.mpracing.biz/gallery/albums/album49/Dsc01061.sized.jpg

http://www.mpracing.biz/gallery/albums/album49/Dsc01063.sized.jpg

[dunatic]

Now here's a restro from Hell

http://www.mpracing.biz/gallery/albums/album90/Picture_083.sized.jpg

http://www.mpracing.biz/gallery/albums/album90/Picture_054.sized.jpg

http://www.mpracing.biz/gallery/albums/album90/Picture_055.sized.jpg

http://www.mpracing.biz/gallery/albums/album90/Picture_059.sized.jpg



AFTER

http://www.mpracing.biz/gallery/albums/album53/Picture_0081.sized.jpg

[dunatic]

father /son "R"'s

http://www.mpracing.biz/gallery/albums/album54/Dunefest_0472.jpg

http://www.mpracing.biz/gallery/albums/album54/roost.jpg

[dunatic]

Coles 330

http://www.mpracing.biz/gallery/albums/album92/100_0188.sized.jpg

http://www.mpracing.biz/gallery/albums/album92/100_0443.sized.jpg

http://www.mpracing.biz/gallery/albums/album92/000_0897.sized.jpg

Coles 295

http://www.mpracing.biz/gallery/albums/album93/000_0664.sized.jpg

http://www.mpracing.biz/gallery/albums/album93/000_0667.sized.jpg

http://www.mpracing.biz/gallery/albums/album93/000_0665.sized.jpg

[dunatic]

Orange Aide

http://www.mpracing.biz/gallery/albums/album94/Picture_110.jpg

http://www.mpracing.biz/gallery/albums/album94/Picture_111.jpg

http://www.mpracing.biz/gallery/albums/album94/Picture_108.jpg

[ground_zero298]

89 250R

[2StrokeFreak]

Ground 0

Did you sell that 89 or are you keeping it?

I never heard back from you.

Whats up with that chain guard?

[ground_zero298]

It's a amp link, have the reciept and instruction for it. Seems to be a suspension dampner, not positive though. Bike has a deposit on it but I don't think he can get the rest of the money for it. I'm giving him a week then returning the deposit.

[2StrokeFreak]

Ground 0

You ever ride behind the outlet mall off of Range Rd.

Me and a few buddies are planning to ride there this Wednesday,
I've never ridden there, do you get hasseled by the man?

[ground_zero298]

yeah i ride thier alot. Sundays is pretty good if you want some racing. The police don't bother you Iv'e never seen them out their. Just stay out of the building that isnt finished. When your coming up 94 get off at range road, take a left, at the next light by burger king take a left and take that road all the way back. You can park where ever. The hills in the back, you can go up and behind and their are some more trails. Just stay out of the building, every one I heard of getting in trouble was in thier, ever since that kid died in their it's been a big deal.

[ground_zero298]

Also take some tires that hook up good in a dirt sand mix. My spiders are awesome in it. Don't run paddles they won't take that well. Taken a few shee's out thier because they had paddles on them.

[2StrokeFreak]

Cool thanks for the heads up. If your deal falls through call me, I'll be in your area wed.

[rollie]

Originally posted by 3-UP
Heres mine, sorry about the motor guys:eek2: .

thats one of the sickest hybrids ive ever seen,nice job buildin it:eek2:

[nwi45]

dunatic, what type of silencer is that? i noticed someone that posted on another page had a shorty silencer like that too...

[EXtreme-]

Just got my 87 all finished. Getting it dyno'd this weekend for an a/f and hp reading!

[dunatic]

Originally posted by nwi45
dunatic, what type of silencer is that? i noticed someone that posted on another page had a shorty silencer like that too...

ESR center mount

[TheFontMaster]

Originally posted by honda350r
This is what my buddies 535 T-rex did when it tried to kill him. ..

I'm almost afraid to ask, did what I think broke that swingarm break that swingarm?

[JTRtrx250r]

:macho bump

[beerock]

Originally posted by honda350r
Why would you say that ??

This site really has no respect unless it is Bull s h i t !

I share my work with this site and you say I am full of it ..

thanks !

hey jim you know i respect you.

problem is not many people around hewre know how informitive you have been back in the days of the old school 250r forum.

'guys this guy is one of the gurus that made me a "guru"

he knows R's inside and out.

[JTRtrx250r]

Originally posted by beerock
hey jim you know i respect you.

problem is not many people around hewre know how informitive you have been back in the days of the old school 250r forum.

'guys this guy is one of the gurus that made me a "guru"

he knows R's inside and out. 100% correct w/ that post Bee'!! I learned more about R's from him than I have from anybody. Dude knows his chit! Just glad to see him back around, need someone who knows what they're talking about to correct me w/ my bad posts LOL:D

[sandthrower]

Here is a newest pics of mine 2 R's

This is my 86 265R

http://69.46.20.38/loc246/th_cc2_55.JPG (http://69.46.20.38/img.php?loc=loc246&image=cc2_55.JPG)

this is my 86 250R trike

http://img24.imagevenue.com/loc102/th_ee3_66.JPG (http://img24.imagevenue.com/img.php?loc=loc102&image=ee3_66.JPG)

It's good to see that the R will aways be around to :eek2: them damn 4 chrokers that have taken over.

:devil: NOT IN MY WORLD:devil: :devil:

There are some very sweat R out there .Lets see more:blah:

[rockman]

left is gf's brother's 88 310, right is my 86 290

[rockman]

here it is nothin special yet. by the way pic is really old got some new crap on it more when its done.

[Mechanix311]

here is my 88 duner

[rockman]

thats bad i love the orange

[genoapb]

Here is an out there hybrid. It is a modified 250R frame and a 250 twin honda motor from a road race bike! Still kinda ruff but it will be tore down this winter and redone better. http://www.planetsand.com/memberphotos/355080-GenosBike002.JPG http://www.planetsand.com/memberphotos/360500-bareflywheelside.JPG

[TRX_250r18]

um amazing?

[Mechanix311]

That thing is gonna be sick. What motor is that out of. Lookin good

[beerock]

Originally posted by Mechanix311
That thing is gonna be sick. What motor is that out of. Lookin good

nsr 250 or a nsr 500

[TheFontMaster]

Originally posted by beerock
nsr 250 or a nsr 500

Is that 2 250r top ends on a different bottom end?

[beerock]

Originally posted by TheFontMaster
Is that 2 250r top ends on a different bottom end?

close to it.

[TheFontMaster]

Originally posted by beerock
close to it.

Where do you find those motors, were they from an old street bike, or are they a custom thing?

[genoapb]

I wish this was an nsr500 motor. LOL, I heard those go for about 20 grand. Anyway this is a motor from a 93 Honda gp road race bike. This motor is suppose to make 75hp right from honda (HRC)!! These motors are pretty hard to come by since they werent produced in the U.S. I will post updates as the project goes on. With the little testing ive done I feel this motor has great potential. The pair of 38mm carbs that come on these motors is a pretty good indication of that, these motors seem to be built for all out racin right from honda and this engine is light too. http://www.planetsand.com/memberphotos/355082-GenosBikelift.JPG Here is a dyno sheet of the detuned NSRroadbike version that has been reworked back to its potential. http://www.apexleisure.co.uk/dyno1.htm

[TheFontMaster]

I wonder how much power you could get out of those with a couple bolt on esr or lrd 310 top ends.:eek2:

[genoapb]

It would take an a lot of machining to get 250r sized cylinders to fit this motor. These cylinders are basically the same as cr125 cylinders with better porting. So the base is pretty small but since the cylinders are staggered kinda overlapping eachother but at a 90* angle it would be possible with alot of machine work unlike say a banshee motor where you are limited since the cylinders are right next to eachother. A big bore kit is available which makes this a 300 but something bigger would be great. I have already looked into other cylinders that might work but at this point im going to see how much power it can make as a 250. Im going to have this motor dynoed myself over the winter and if it really makes 75hp now im thinking 100hp wouldnt be out of the question!!!

[zedicus00]

actually there is a NSR 500 motor, it was a 4 cylender engine, and ONLY sold to road racers. i dont think theres any of them in the wild.

yur right about that one having topends closer to the cr125. exceps i was thinking the botom cylender on that engine is a case induction setup and the top cylender is a standard cylender induction.

you may look into big bore kits for cr125 engines. or maybe come up with a stroke kit for that engine. that street bike was very popular across the pond for a few years so im sure theres some mods out there for it.

anyways thas a friggin sweet setup. you should machine it to take a 250R jug then mount 2 saberracing kits on it...

think the botom end could handle 200 horse??

[genoapb]

Both cylinders are case reed inducted and for now im gonna keep it as a 250. I dont know if this motor could take 200hp, lol. I do know that this motor could probably take alot more horse than an R motor since those were only designed for about 30hp and these are designed for 75hp.

[beerock]

Originally posted by ground_zero298
Also take some tires that hook up good in a dirt sand mix. My spiders are awesome in it. Don't run paddles they won't take that well. Taken a few shee's out thier because they had paddles on them.

the best tires for loose dirt and sand other then a paddle is the OHTSU radial rear.

[sick2000si]

here are pics of my 87

[Mean250r]

nice bikes keep em comin!:scary:

[Mean250r]

nice bikes keep em comin!:scary:

[Lonestar_R]

ok ok here's mine

[Ripitupfilms]

rx

[Ripitupfilms]

real colors

[Honda_Rebel_96]

Originally posted by Honda_Rebel_96

[Honda_Rebel_96]

Originally posted by Honda_Rebel_96

[Honda_Rebel_96]

Originally posted by Honda_Rebel_96

[Honda_Rebel_96]

Originally posted by Honda_Rebel_96

[Honda_Rebel_96]

Originally posted by Honda_Rebel_96

[TheLadiesMan]

http://72.29.68.184/~despera/250R/350R%20dune%20atire/100_2257.JPG
http://72.29.68.184/~despera/250R/quad%20and%20truck/100_2314.JPG

[TampaBoy813]

Originally posted by TheLadiesMan
http://72.29.68.184/~despera/250R/350R%20dune%20atire/100_2257.JPG
http://72.29.68.184/~despera/250R/quad%20and%20truck/100_2314.JPG sweet mother of g0d...didnt know yours was a 350cc....thats sick!

[doc-bones]

Sorry guys, I am a 1/2 trader. For dune purposes only I have a new addition to the family. It is called a HonShee. It is a Lonestar Outlaw chassis (250R Geometry) with a Trinity 421 powervalve motor. I just got back from Dumont, Ca., Sand Hollow, Ut., and Armagosa sand dunes, Nv.
This bike is way fast! I really was suprised how fast. It scorched paddles with 15T X 39T gearing! I have a Sparks 350 Powervalve that can not compare, but still love! Here are a few pics!

[doc-bones]

More

[TheLadiesMan]

Originally posted by doc-bones
More

i love the view!!! and the Quad!!!!!!

[doc-bones]

Here is one more!

[doc-bones]

A little air......................

[86-250Rnut]

Finnaly figured out how to post pics... i think
Mitch:macho

[beerock]

Originally posted by doc-bones
A little air......................

DOC nice air bro, I guess you and jeff had fun. To bad my back is all messed up. how about a front view?

p.s.
Im going to las vegas for christmas maybe ill call jeff up and steal yer honshee to feel the power then bring it back real quick like.:blah:

[doc-bones]

front

[doc-bones]

side

[doc-bones]

rear

[86-250Rnut]

another

[J_bob_28]

Originally posted by doc-bones
front

definately QOTM material

[doc-bones]

Thanks J-bob-28, I appreciate it!
Docbones

[rebelbanshee]

sweet merciful crap! thats a nice BAnshee!

[bananas]

Doc,

Looks great... Is it faster than you R?
Did you bring it home with you...
Hope to ride soon...

Troy

[JTRtrx250r]

nice R doc...

[doc-bones]

Thanks guys,
Yes, bananas this bike is unbelievably fast.
Doc

[beerock]

he didint put all his pics up

supposedly from what he said it revs so high that hes gonna run high comp to keep the revs down LOL

you can tell this thing has some power look at that roost.
the only bikes i saw in glamis throwin roost like that were the ones flying up oldsmobile hill faster then most.

dont forget though, its a honshee not a banshee.

[doc-bones]

HAVING FUN ROOSTING!!!! :D

[jon370r]

Here is mine

[jon370r]

Looks a little different now. I think I'm going back to the CT graphics. I like the way they look on the black better.

[jon370r]

Buddy Mike on his 330R

[jon370r]

Set up for 1/8 mile drags.

[jon370r]

again

[Eddiesanders250]

what size tank is that? it doesnt look stock. i like it

[jon370r]

new style IMS 4.0 gal.

[Eddiesanders250]

wow it doesnt look that big and thats what i like about it. did they change their design or what? the old ones that ive seen stick way in h*ll up there. where did you get it, directly from ims or another dealer?

[jon370r]

The Fullbore fenders cover up more of the tank but still have to be trimmed quite a bit to fit around the tank right. I also made my own front mounting brackets that are about an inch longer to raise the front mounting position of the fenders to hide more of the tank.When you have to run 110 race fuel, is nice to have the extra capacity for long rides. You can find the tank on the IMS and Rocky Mountain web sites.

[hang1p]

THIS IS BEFORE SHE WAS COMPLETLY DONE. HARD TO COMPETE WITH THAT 370R.

[hang1p]

IN ACTION

[hang1p]

JON 370R IN ACTION

[hillbillysmw]

38mm kehin
bored 80over
ported and polished
hot rod
cr head gasket
topend pipe
lrd muff
kn filter
mag hyd clutch
hinson clutchbasket
yellow maier
nacs decor

[Eddiesanders250]

Originally posted by jon370r
The Fullbore fenders cover up more of the tank but still have to be trimmed quite a bit to fit around the tank right. I also made my own front mounting brackets that are about an inch longer to raise the front mounting position of the fenders to hide more of the tank.When you have to run 110 race fuel, is nice to have the extra capacity for long rides. You can find the tank on the IMS and Rocky Mountain web sites.

Ya i hear ya on the gas part. I cant take long rides with the rest of the family, i run outta gas. And it will definately cut my ride short when im running race gas with my stock tank. Have you seen any 3.6 gallon tanks? I wonder if they might sit down lower or maybe not go up as high?

[jon370r]

The old style 3.6 sit even higher. If you see pics. of just the tanks uninstaled you will see how it holds more with less height.

[beerock]

Jon, i have a feeling you guys would get a kick out of riding with me and my buddy doc and the rest of the crew. we ride all day and go up crazy hills like you guys.

the IMS tank is nice, but like jon said requires trimming to fit right. the clark tank fits so well its almost like OEM. they may be high up but ergonomicly it fits the bike perfect.

[Eddiesanders250]

even if I have maier plastics wich are not one piece, the tank is separate I will still have to trim the plastics? Im wondering why they dont make like a 2.5 or 3 gal tank. It goes stock then jumps to the 3.6gal then to the 4 gal.

[jon370r]

2.6 gal. is a stock size tank. The 4.0 should fit maier plastics fine, maier are more like the stock fenders around the tank.

[jon370r]

Beerock, I'm always up for riding with other NUTS. Time is a little limited with a wife and 2 kids(4 and 6 years old). If you guys have a good enough ride area maybe we can plan a weekend event in the spring, or your group could come up to Maine. We have several large gravel pits in the area with hills as steep and nasty as you want to get.

[TampaBoy813]

My friends 1986 CT 350R....we have been working on it for a little bit now...fixing little things it needed....
http://img188.imageshack.us/img188/541/10010779jt.jpg
http://img188.imageshack.us/img188/851/10010803zi.jpg

[TX400ex-250r]

For Sale!!

[Ripitupfilms]

damm id buy ut if you were about 3 states closer

[400exr]

Here's my new 250r. She came a looong way to get here! she's far from being done, but it's a start. What do ya think?
http://www.imagestation.com/picture/sraid195/p0d5156c2778902bfcfed8ac6f212615b/f12bed7e.jpg

[Eddiesanders250]

Not bad i like it. what are your plans for it?

[jon370r]

Originally posted by honda350r
This is a rotax cylinder 250r It was a high maintance POS ,


From page 23

Who built the rotax hybrid engine and what components did it use? What kind of problems did it have? I'm interested because I'm in the middle of building one of these myself.

[TLR-Online]

TTT!

I know this is old... but it has some nice pictures that aren't in the "Show off your 250R" thread.

[young97456]

<img src="http://img220.imageshack.us/img220/5804/qqq00011.jpg">

[honda400ex2003]

http://img688.imageshack.us/img688/1293/img0866y.th.jpg (http://img688.imageshack.us/i/img0866y.jpg/)


heres my newest addition to the family. lol it will be pretty much fully restored this spring along with a few mods on stuff.

it currently has boyesen reeds and pro circuit header and 304 silencer. thats about it so far engine wise and it will stay that way. i have a couple spare cylinders for it, i have stock blue shocks off another 87, will be getting razrs on .190s this spring along with white fenders, i have the seat cover already, and a some new ASV levers for it. It will get tore down this spring and all the black will get cleaned up and the original gold stuff will get fixed. I just have to find stock style graphics for it and it will be about done then. :D It will have some esr stuff on it also once i get all of the stock stuff together. I wanna mod it to my liking but want to get all of the stock stuff i can first so i can restore it back one day to add to my collection.

It along with my current 400ex will be the first 2 in it once i get my own garage and place. :D

i already added the dg stuff to it along with the stock tool box, a different grab bar that is stock style, and my stock 400 rims and spare tires just to make it look decent for the pics. steve

[dquarton]

Here’s my new one…….
Frame: LRD Attitude aluminum
A-Arms: Gibson Plus 3” Chrome Long Travel
Swingarm: Walsh Chrome No Link
Steerer Tube: Roll Design chrome plus 2” with Billet clamp and billet bar clamp
Front Shocks: Custom Axis Long Travel
Rear Shock: Custom Axis No Link Long Travel
Front Hubs: Nac’s Billet
Rear Hubs: Nac’s Billet
Axle: RPM chrome plus 2”
Front Brakes: TRX with stainless lines and chromed calipers and reservoir
Rear Brakes: TRX with stainless line and chromed caliper
Rotors: Wave Rotors all around with LSR Billet Anti Fade Brake Hub
Motor: ESR 350PV with port work by Rudy Kurtz of Port Magic. Completely polished and/or chromed with Hinson Chrome removable clutch cover and billet water pump cover. Hinson Billet clutch basket and Yukon gears.
Radiator: Walsh oversize aluminum
Pipe: ESR TRX 9 chrome
Carburetor: Keihin 39mm Airstryker
Intake: ESR with billet spacer
Airbox: ESR Airbox Eliminator
Fenders OEM 1988 TRX 250R Race Cut
Gas Tank: IMS 4 Gallon “Clear”
Seat: Cascade (soon to be Quad Tech)
Foot Pegs: Roll Design Stainless
Front Bumper: Duncan Chrome
Throttle: Moose Billet with stainless Braided line
Levers: ASV Billet with stainless braided clutch cable
Kickstarter/Shifter: ESR Billet
Rear Brake Pedal: Hinson Billet

http://i54.tinypic.com/117vgh1.jpg

http://i51.tinypic.com/2hdaas5.jpg

http://i53.tinypic.com/25gfadf.jpg

http://i51.tinypic.com/10nffiu.jpg

http://i56.tinypic.com/n13q10.jpg

http://i51.tinypic.com/20f3me1.jpg

http://i54.tinypic.com/24dhlqs.jpg

http://i54.tinypic.com/2i0dvl0.jpg

http://i54.tinypic.com/2n7maf7.jpg

http://i51.tinypic.com/30krev4.jpg

http://i52.tinypic.com/1zvwql5.jpg

http://i53.tinypic.com/wrjfw3.jpg

http://i54.tinypic.com/157nqye.jpg

[Conant19]

for sale 2500

[ytman]

couldn't you at least clean it up for the photo session? jees

[dquarton]

Originally posted by ytman
couldn't you at least clean it up for the photo session? jees

LOL......sorry!

[k7mm]

Very refreshing to see such a nice 250R!Thanks dquarton!Keith

[dquarton]

Originally posted by k7mm
Very refreshing to see such a nice 250R!Thanks dquarton!Keith

Thank you for the great compliment!

[lp designz]

Wow^^^^^ that's one of the sickest I have seen...
I can't wait to tear mine down and build it from the ground up.... Out here in Vegas it's riding season lol... We ride all year and park them in the summer... 120* out in the desert sucks!!