Hub/Axle Problem???

[kid300ex]

I got a problem, my hub moves back and forth even with the bolt tightened, do I need to by a new hub?

[DEAL]

your hub is gettin worn , tighten in with an air wrench and see if it still moves. Mine moved until i tightened them and now they are alright.

try finding a washer that will fit over the splines on the axle and take the nut off. put the washer behind the nut then tighted down. that should fix your problem.

[Ex'r Marlin]

If your hubs are getting prettly sloppy and you tightened them as tight as you can..... Don't hesitate any longer getting new hubs!!!! You don't want to start damaging your expensive axle!!!

BTW, it is a lot easier and cheaper replacing the hubs than replacing an axle!!